Honeywell Sensing And Control - LSJ1A-7M

LSJ1A-7M by Honeywell Sensing And Control

Image shown is a representation only.

Manufacturer	Honeywell Sensing And Control
Manufacturer's Part Number	LSJ1A-7M
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): WOBBLE STICK TYPE; AC Maximum Rating R Load (Contact): 10A@600VAC; Sealing: EPOXY TERMINAL SEALED; IP65; IP66; IP67;
Datasheet	LSJ1A-7M Datasheet

LSJ1A-7M Technical Details

NAME	DESCRIPTION
Other Names:	LSJ1A-7M-ND 480-5026 LSJ1A7M 2266-LSJ1A-7M
Maximum DC Contact Voltage:	240 V
Type (Actuator):	WOBBLE STICK TYPE
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	600 V
AC Maximum Rating R Load (Contact):	10A@600VAC
Sealing:	EPOXY TERMINAL SEALED; IP65; IP66; IP67
Minimum Operating Temperature:	-12 Cel
Mounting Feature:	PANEL MOUNT
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	SCREW
Maximum Operating Temperature:	93 Cel
Maximum AC Contact Current:	10 A

Popular Products

BSS84-7-F

Diodes Incorporated

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

LM358N

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

ULN2803A

Texas Instruments

ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.

ULN2803ADW

Texas Instruments

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

BAV99

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

LM317T

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

LL4148

Surge Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

AH180-WG-7

Diodes Incorporated

AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.

LM317T

Integrated Power Semiconductors

Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;

Category Top Products