UM10B10A01 by Honeywell Sensing And Control | Switches

Image shown is a representation only.

Manufacturer	Honeywell Sensing And Control
Manufacturer's Part Number	UM10B10A01
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): FLAT LEVER; Body Length/Diameter: 19.8 mm; Switch Action: MOMENTARY;
Datasheet	UM10B10A01 Datasheet

NAME	DESCRIPTION
Maximum Operating Force:	.15 N
Type (Actuator):	FLAT LEVER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	250 V
Maximum Pre Travel:	.6 mm
AC Maximum Rating R Load (Contact):	.1A@250VAC
Mounting Feature:	THROUGH HOLE-STRAIGHT
Actuator Travel (mm):	.7
Body Width:	6.4 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	SOLDER
Body Height:	11 mm
Body Length/Diameter:	19.8 mm
Manufacturer Series:	UM
Maximum AC Contact Current:	.1 A

Popular Products

FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.

GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.