Honeywell Sensing And Control - V7-1V19E994-403

  1. Home
  2. Honeywell Sensing And Control - V7-1V19E994-403
V7-1V19E994-403 by Honeywell Sensing And Control

Image shown is a representation only.

Manufacturer Honeywell Sensing And Control
Manufacturer's Part Number V7-1V19E994-403
Description SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SPECIAL LEVER; Maximum Operating Force: 1.16 N; AC Maximum Rating R Load (Contact): 21A@125VAC;
Datasheet V7-1V19E994-403 Datasheet
NAME DESCRIPTION
DC Maximum Rating R Load (Contact): A@VDC
Maximum Operating Force: 1.16 N
Type (Actuator): SPECIAL LEVER
Switch Type: SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage: 125 V
Maximum Pre Travel: 2.57 mm
AC Maximum Rating R Load (Contact): 21A@125VAC
Minimum Operating Temperature: -40 Cel
Mounting Feature: PANEL MOUNT
Actuator Travel (mm): 4.04
Body Width: 10.2 inch
Switch Action: MOMENTARY
Switch Function: SPDT
Termination Type: QUICK CONNECT
Body Height: 15.9 mm
Body Length/Diameter: 28.8 mm
Maximum Operating Temperature: 82 Cel
Manufacturer Series: V7
Maximum AC Contact Current: 21 A
Plant 5!
Your quote plants 5 trees.

Popular Products

Category Top Products

SS-3GPB by Omron

SS-3GPB

Omron

Omron SS-3GPB is a SPDT snap acting/limit switch with 70000 cycles electrical life. It features IP40 sealing, 6.4" body width, and PIN PLUNGER actuator type. Ideal for applications requiring momentary switch action, with max AC contact voltage of 125V and DC contact current of 3A@30VDC.
D2FS-FL-N-T by Omron

D2FS-FL-N-T

Omron

SNAP ACTING/LIMIT SWITCH;
JJJHLGG200NOPMRTR by TE Connectivity

JJJHLGG200NOPMRTR

TE Connectivity

TE Connectivity's JJJHLGG200NOPMRTR is a BROWN SPST switch with 0.05A AC/DC contact current. Featuring STAINLESS STEEL end contacts and SILVER plating, it has a SIDE TYPE actuator for OFF-(ON) function. Ideal for PANEL MOUNT applications, this SNAP ACTING/LIMIT SWITCH uses SOLDER termination and POLYETHYLENE material.
D2F-01L-A1 by Omron

D2F-01L-A1

Omron

Omron's D2F-01L-A1 is a SPDT snap action/limit switch with 30000 cycles electrical life. Featuring HINGE LEVER actuator type, it has IP40 sealing and operates b/w -25 to 65 °C. Ideal for applications requiring momentary switch action and through hole-right angle mounting.
MS16106-5 by Honeywell Sensing And Control

MS16106-5

Honeywell Sensing And Control

SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): PLUNGER; DC Maximum Rating R Load (Contact): 10A@28VDC; Switch Action: MOMENTARY;
608.8171.016 by Altech

608.8171.016

Altech

SNAP ACTING/LIMIT SWITCH;
Z-15GM22-B by Omron

Z-15GM22-B

Omron

Omron Z-15GM22-B is a snap action/limit switch with SPDT function. It has an electrical life of 500,000 cycles and can handle up to 15A@250VAC. With a short hinge roller lever actuator, it is suitable for panel mounting applications requiring momentary switch action.
D4BL-2DRA by Omron

D4BL-2DRA

Omron

SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4BL;
ASKHC2B14AC by Itt Cannon

ASKHC2B14AC

Itt Cannon

ITT Cannon's ASKHC2B14AC is a SPDT snap action/limit switch with 200000 cycle electrical life. Featuring a large black button actuator, it has a max AC contact current of 15A@250VAC and operates b/w -55 to 85 °C. Ideal for panel mount applications requiring momentary switch action.
FF6-21-DC-03 by Honeywell Sensing And Control

FF6-21-DC-03

Honeywell Sensing And Control

FF6-21-DC-03 by Honeywell is a 3PST snap action/limit switch with IP67 sealing. It operates b/w -10°C to 55°C, handling up to 1A@30VDC. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
D4NL-2HFG-B by Omron

D4NL-2HFG-B

Omron

SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4NL;
D2SW-P01L3M by Omron

D2SW-P01L3M

Omron

The Omron D2SW-P01L3M is a snap action/limit switch with SPDT function. It has an electrical life of 200,000 cycles and sealing rating of IP67, making it suitable for harsh environments. With a max operating temperature of 70°C and actuator travel of 0.8mm, it is commonly used in panel mount applications requiring momentary switch action.
LSYAB1A-2A by Honeywell Sensing And Control

LSYAB1A-2A

Honeywell Sensing And Control

LSYAB1A-2A by Honeywell Sensing And Control is a SPDT snap action/limit switch with EPOXY TERMINAL SEALING (IP65, IP66, IP67). It has a max operating temperature of 121°C and can handle up to 10A@600VAC. Ideal for panel mounting applications requiring momentary switch action in harsh environments.
BA-3RX717 by Honeywell Sensing And Control

BA-3RX717

Honeywell Sensing And Control

Honeywell's BA-3RX717 is a 17.45mm wide SPDT snap action/limit switch with 20A@480VAC AC and 0.5A@125VDC DC contact ratings. With 0.89mm actuator travel, it offers momentary switch action and screw termination for panel mounting applications.
BZ-2RL2T04 by Honeywell Sensing And Control

BZ-2RL2T04

Honeywell Sensing And Control

Honeywell Sensing And Control's BZ-2RL2T04 is a SPDT snap acting/limit switch with 5.48mm actuator travel and 1.39N max operating force. Its corrosion-proof sealing makes it ideal for panel mount applications requiring momentary switch action in industrial settings.
11SM7601-H4 by Honeywell Sensing And Control

11SM7601-H4

Honeywell Sensing And Control

11SM7601-H4 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 4A@250VAC and a DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers a body width of 6.35 inch and an actuator travel of 0.64 mm.
LSA1AC by Honeywell Sensing And Control

LSA1AC

Honeywell Sensing And Control

LSA1AC by Honeywell Sensing And Control is a SPDT snap acting/limit switch with side rotary actuator. It operates b/w -12°C to 60°C, suitable for panel mounting applications. With max contact voltages of 250V DC and 600V AC, it offers reliable momentary switching in various industrial settings.
23AC81 by Honeywell Sensing And Control

23AC81

Honeywell Sensing And Control

23AC81 by Honeywell is a SNAP ACTING/LIMIT SWITCH with STAINLESS STEEL housing. It has SPDT switch function, 5A@250VAC AC Max Rating R Load, and -18 to 82 °C operating temperature range. Ideal for PANEL MOUNT applications requiring precise actuation and durable construction.
11HM1 by Honeywell Sensing And Control

11HM1

Honeywell Sensing And Control

11HM1 by Honeywell Sensing And Control is a snap action/limit switch with SPDT function, hermetically sealed body, and plunger actuator. It has a max operating temperature of 121°C and can handle up to 1A AC current. Ideal for panel mounting applications requiring corrosion-proof and reliable switching capabilities.
LSA2B-2C by Honeywell Sensing And Control

LSA2B-2C

Honeywell Sensing And Control

LSA2B-2C by Honeywell is a DPDT snap action/limit switch with EPOXY terminal sealing (IP65, IP66, IP67). It has a max operating temp of 121°C and can handle up to 10A@600VAC. Ideal for panel mounting applications requiring side rotary actuation in environments with temperature range from -12°C to 121°C.