Infineon Technologies - AME270461X/CHB

7448225007 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has 2 functions, 4 terminals, and an inductance of 700uH. This panel mount filter is UL approved and commonly used for filtering data lines in electronic applications.

Wurth Elektronik 742792095 is a FERRITE CHIP Data Line Filter with 2 terminals, suitable for surface mount applications. It operates b/w -55 to 125 °C, with dimensions of L2.0xB1.2xH0.9 (mm). Featuring a max frequency of 100 MHz and output impedance of 2700 OHM, it has a DC resistance of 0.6 ohm and rated current of 0.2 A.

7448263505 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 500uH, making it suitable for applications requiring high current filtering and protection against electromagnetic interference.

EMIF02-USB03F2 by STMicroelectronics is a DATA LINE FILTER with 2 functions and 11 terminals. It has a capacitance of 20uF, operates b/w -40 to 85°C, and uses matte tin finish. Ideal for applications requiring IEC approvals in surface mount configurations.

NZF220TT1G by Onsemi is a Data Line Filter with 1 function and 3 terminals. It features a max DC resistance of 110 ohm, output impedance of 50 OHM, and capacitance of 26.4 uF. Ideal for applications requiring surface mount filters in compact dimensions like data transmission systems.

Wurth Elektronik 744231091 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has 4 terminals, tin finish, and dimensions of L2.0xB1.2xH1.2 (mm). Ideal for applications requiring filtering in data lines with a current rating of 0.37A.

Vishay Intertechnology's ILHB1206ER601V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.

7427927310 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, has a max DC resistance of 0.03 ohm, and an output impedance of 10 ohm. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.

Murata Manufacturing's DLW31SN261SQ2L is a data line filter with 2 functions, rated at 50V and 0.31A. It offers a max DC resistance of 0.5 ohm and an output impedance of 260 ohm. This surface mount filter operates b/w -40°C to 85°C, making it ideal for various electronic applications requiring noise suppression in data lines.

Murata Manufacturing's BLM15PX121SN1D is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C, DC resistance of 0.055 ohm, and output impedance of 120 ohm. Ideal for surface mount applications in electronics to suppress electromagnetic interference.

Bourns SRF3216-222Y is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. Ideal for applications requiring high output impedance and low DC resistance in compact surface mount designs.

DLW32MH101XT2L by Murata Manufacturing is a data line filter with 2 functions. It has a min insulation resistance of 10 Mohm and can operate at temperatures ranging from -40 to 125 °C. This filter is commonly used in automotive applications due to its AEC-Q200 screening level.

Wurth Elektronik 742792040 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a DC resistance of 0.15 ohm. Ideal for applications requiring noise suppression in circuits operating at frequencies ranging from 100 MHz to 150 MHz.

Murata Manufacturing's BLM18KG601SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.15 ohm and output impedance of 600 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 1.3A and is commonly used in electronic devices requiring noise suppression on data lines.

Murata Manufacturing's BLM18BA100SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.25 ohm. Ideal for surface mount applications, it provides an output impedance of 10 ohm and rated current of 0.5A in filtering data lines at frequencies above 100MHz.

DATA LINE FILTER; Rated Current: 15 A; No. of Functions: 2; Length: 5.6 mm; Output Impedance (ohm): 33 OHM; Packing Method: TAPE AND REEL;

The TDK HF70ACC575032-T is a chip bead data line filter with 2 terminals, operating b/w -40 to 125°C. With dimensions of L5.7xB5.0xH3.2 mm, it offers a max DC resistance of 0.04 ohm and output impedance of 300 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter is commonly used in electronic devices requiring noise suppression on data lines.

Murata Manufacturing's BLM18AG121SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -55°C to 125°C, has a DC resistance of 0.18 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.

EMI7204MUTAG by Onsemi is a data line filter with 4 functions and rated voltage of 2.5V. With inductance of 0.017uH, it operates b/w -40 to 85°C, suitable for surface mount applications requiring output impedance of 50 ohm.

4300-025LF by Cts is a Data Line Filter with FEED THROUGH CAPACITOR type. It has a Rated Voltage of 50V, Max Insertion Loss of 60dB, and Min Insulation Resistance of 10000 Mohm. Ideal for applications requiring noise filtering in data lines with a rated current of 5A.