Infineon Technologies - AME28461W

Wurth Elektronik 742792695 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a max frequency of 110 MHz. Ideal for applications requiring noise suppression in electronic circuits.

TDK's MPZ2012S300AT000 is a chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.01 ohm and output impedance of 30 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.

FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .7 A; No. of Functions: 1; Terminal Finish: Tin (Sn); Output Impedance (ohm): 300 OHM;

TDK's ACF321825-102-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 140 MHz. It has a rated voltage of 20 V, 0.15 ohm DC resistance, and dimensions of L3.2XB1.8XH2.5 mm. Ideal for data line filtering applications due to its high insulation resistance and compact surface mount design.

The TDK PS1240P02BT is a Data Line Filter with max operating temp of 70°C and min operating temp of -20°C. It has a diameter of 12.2mm and height of 6.5mm, suitable for through hole mounting applications in various electronic devices.

NUF8402MNT4G by Onsemi is a data line filter with 8 functions, rated at 5V. It offers 35dB attenuation at 800MHz, operates b/w -40 to 85°C, and has a max DC resistance of 115 ohm. Commonly used in IEC-approved applications for noise filtering in data lines.

DATA LINE FILTER; Maximum DC Resistance: .01 ohm; Rated Current: 10 A; JESD-609 Code: e4; Additional Features: PI-TYPE CIRCUIT; Minimum Operating Temperature: -55 Cel;

Murata Manufacturing's BLM18PG181SN1D is a chip bead data line filter with 2 terminals, rated for 1.5A current and 180 ohm output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.

TDK's MPZ1608D101BTD25 is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 100 ohms and max DC resistance of 0.15 ohm. Ideal for data line filtering applications due to its compact size and operating temperature range from -55°C to 125°C.

FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2.5 A; Approvals (V): IEC; Width (mm): 1.6; Output Impedance (ohm): 600 OHM;

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: 5 A;

Murata's BLM18SG700TN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. With dimensions of 1.6x0.8x0.5mm, it offers an output impedance of 70Ω and rated current of 4A. Ideal for surface mount applications, this ferrite chip filter has a max frequency of 100MHz, making it suitable for noise suppression in electronic circuits.

TDK's ACT1210-510-2P-TL00 is a Data Line Filter with 2 functions, 10 Mohm min. insulation resistance, and 80V rated voltage. AEC-Q200 screened, it operates b/w -40 to 150 °C and has an inductance of 51uH. Ideal for applications requiring noise suppression in automotive electronics.

Murata's BLM18AG221SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 220 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of 1.6x0.8x0.8mm.

HZ0603B112R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With a max frequency of 1000 MHz and DC resistance of 0.8 ohm, it is ideal for applications requiring noise suppression in high-frequency circuits. This surface mount filter measures L1.6XB.8XH.8 mm and has an output impedance of 1100 OHM, making it suitable for compact electronic devices.

ACM7060-301-2PL-TL01 by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has a min insulation resistance of 10 Mohm and is ideal for surface mount applications requiring output impedance of 300 ohm.

TDK's MPZ1608S600ATAH0 is a 0603 chip bead data line filter with FERRITE CHIP technology. It offers a max operating temperature of 125°C, DC resistance of 0.02 ohm, and output impedance of 60 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.

DLW5BTN101SQ2L by Murata Mfg: Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 6A Rated Current. Ideal for noise suppression in data lines due to its 100 OHM Output Impedance. Surface mount type suitable for various electronic applications.

Wurth Elektronik 74279221601 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2.5A current and 600Ω output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications requiring noise suppression in electronic circuits.

Taiyo Yuden's FBMH1608HM600-T is a chip bead data line filter with 2 terminals, rated for 3A current. Featuring ferrite chip construction, it offers 60 ohm output impedance and operates b/w -40 to 85°C. Ideal for surface mount applications, this compact filter measures L1.6xB0.8xH0.8mm and is designed for frequencies up to 100MHz.