ARE2815D/CKA by Infineon Technologies | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	Infineon Technologies
Manufacturer's Part Number	ARE2815D/CKA
Description	DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: OTHER; No. of Terminals: 9; Package Code: DMA; Package Shape: SQUARE; Surface Mount: YES;
Datasheet	ARE2815D/CKA Datasheet
In Stock	53

NAME	DESCRIPTION
Package Body Material:	UNSPECIFIED
Maximum Line Regulation:	.5 %
Nominal Output Voltage:	15 V
Control Mode:	VOLTAGE-MODE
Trim or Adjustable Output (V):	YES
Protection(s):	OVERLOAD; SHORT CIRCUIT
Width (mm):	30.48 mm
Maximum Seated Height:	7.874 mm
Maximum Output Current:	.27 A
Maximum Total Power Output:	5 W
Surface Mount:	YES
No. of Outputs:	2
No. of Terminals:	9
Total Dose (V):	150k Rad(Si)
Terminal Position:	DUAL
Package Style (Meter):	MICROELECTRONIC ASSEMBLY
Screening Level:	MIL-PRF-38534 Class K
Maximum Load Regulation:	1 %
Technology:	HYBRID
JESD-30 Code:	S-XDMA-G9
Package Shape:	SQUARE
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Height:	7.874 mm
Package Code:	DMA
Minimum Output Voltage:	14.85 V
Maximum Switching Frequency:	450 kHz
Minimum Input Voltage:	18 V
Maximum Input Voltage:	50 V
Maximum Output Voltage:	15.15 V
Minimum Operating Temperature:	-55 Cel
No. of Functions:	1
Nominal Input Voltage:	28 V
Other IC type:	DC-DC REGULATED POWER SUPPLY MODULE
Length:	30.48 mm
Main Out Ripple Voltage:	.02828 Vrms
Additional Features:	ALSO -15 V OUTPUT VOLTAGE AVAILABLE
Main Output Efficiency:	81 %
Temperature Grade:	OTHER

Pricing (USD)

Qty.	Unit Price	Ext. Price
53	-	-

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;

OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;

1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.