BTS733L1 by Infineon Technologies | Interface ICs

Image shown is a representation only.

Manufacturer	Infineon Technologies
Manufacturer's Part Number	BTS733L1
Description	BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 4.8 A;
Datasheet	BTS733L1 Datasheet
In Stock	794

NAME	DESCRIPTION
Minimum Supply Voltage:	5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	12 V
Maximum Seated Height:	2.65 mm
Maximum Output Current:	4.4 A
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Terminal Finish:	TIN LEAD
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	MOS
JESD-30 Code:	R-PDSO-G20
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.6 mm
Turn-off Time:	450 us
Driver No. of Bits:	2
Maximum Supply Voltage:	24 V
Turn-on Time:	350 us
Nominal Output Peak Current Limit:	4.8 A
JESD-609 Code:	e0
No. of Functions:	2
Qualification:	Not Qualified
Package Equivalence Code:	SOP20,.4
Output Current Flow Direction:	SOURCE
Length:	12.8 mm
Terminal Pitch:	1.27 mm
Power Supplies (V):	12

Pricing (USD)

Qty.	Unit Price	Ext. Price
794	-	-

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;