CY7C1143KV18-400BZI by Infineon Technologies | Memory ICs

Image shown is a representation only.

Manufacturer	Infineon Technologies
Manufacturer's Part Number	CY7C1143KV18-400BZI
Description	QDR SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 165; Package Code: LBGA; Package Shape: RECTANGULAR; No. of Functions: 1;
Datasheet	CY7C1143KV18-400BZI Datasheet
In Stock	368

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Standby Current:	.29 Amp
Organization:	1MX18
Output Characteristics:	3-STATE
Maximum Seated Height:	1.4 mm
Minimum Supply Voltage (Vsup):	1.7 V
Sub-Category:	SRAMs
Surface Mount:	YES
Maximum Supply Current:	610 mA
Terminal Finish:	TIN LEAD
No. of Terminals:	165
Maximum Clock Frequency (fCLK):	400 MHz
No. of Words:	1048576 words
Terminal Position:	BOTTOM
Package Style (Meter):	GRID ARRAY, LOW PROFILE
Technology:	CMOS
JESD-30 Code:	R-PBGA-B165
Package Shape:	RECTANGULAR
Terminal Form:	BALL
Operating Mode:	SYNCHRONOUS
Maximum Operating Temperature:	85 Cel
Package Code:	LBGA
Width:	13 mm
Moisture Sensitivity Level (MSL):	3
Input/Output Type:	SEPARATE
Memory Density:	18874368 bit
Minimum Standby Voltage:	1.7 V
Memory IC Type:	QDR SRAM
JESD-609 Code:	e0
Minimum Operating Temperature:	-40 Cel
Memory Width:	18
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	BGA165,11X15,40
Length:	15 mm
Maximum Access Time:	.45 ns
No. of Words Code:	1M
Nominal Supply Voltage / Vsup (V):	1.8
Additional Features:	BURST ARCHITECTURE
Peak Reflow Temperature (C):	260
Parallel or Serial:	PARALLEL
Terminal Pitch:	1 mm
Temperature Grade:	INDUSTRIAL
Maximum Supply Voltage (Vsup):	1.9 V
Power Supplies (V):	1.5/1.8,1.8

Pricing (USD)

Qty.	Unit Price	Ext. Price
368	$35.710	$13,141.280

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;