ETT580N16P60HPSA1 by Infineon Technologies | Triggering Devices

Image shown is a representation only.

Manufacturer	Infineon Technologies
Manufacturer's Part Number	ETT580N16P60HPSA1
Description	SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Case Connection: ISOLATED;
Datasheet	ETT580N16P60HPSA1 Datasheet
In Stock	474

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Trigger Device Type:	SCR
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Configuration:	SERIES CONNECTED, CENTER TAP, 2 ELEMENTS
Surface Mount:	NO
Maximum Leakage Current:	100 mA
Minimum Critical Rate of Rise of Off-state Voltage:	1000 V/us
Maximum Holding Current:	300 mA
No. of Terminals:	7
Terminal Position:	UPPER
Package Style (Meter):	FLANGE MOUNT
JESD-30 Code:	R-PUFM-X7
No. of Elements:	2
Package Shape:	RECTANGULAR
Terminal Form:	UNSPECIFIED
Maximum Operating Temperature:	135 Cel
Screw Terminals Description:	A-K-AK
Case Connection:	ISOLATED
Repetitive Peak Off-state Voltage:	1600 V
Maximum RMS On-state Current:	700 A
Repetitive Peak Reverse Voltage:	1600 V
Maximum On-state Voltage:	1.43 V
Non Repetitive Peak On-state Current:	16500 A
Maximum DC Gate Trigger Voltage:	2 V
Maximum DC Gate Trigger Current:	250 mA
Quick Connects Description:	2G-2GR
Maximum On-state Current:	586 A
Additional Features:	HIGH RELIABILITY
Reference Standard:	IEC-61140, IEC-747-6, UL RECOGNIZED
Peak Reflow Temperature (C):	NOT SPECIFIED
Nominal Circuit Commutated Turn-off Time:	300 us

Pricing (USD)

Qty.	Unit Price	Ext. Price
474	$213.190	$101,052.060

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.

CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.