Image shown is a representation only.
| Manufacturer | Integrated Silicon Solution |
|---|---|
| Manufacturer's Part Number | IS25LP128-JBLE |
| Description | FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: SQUARE; No. of Functions: 1; |
| Datasheet | IS25LP128-JBLE Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Package Body Material: | PLASTIC/EPOXY |
| Maximum Standby Current: | .000065 Amp |
| Organization: | 128MX1 |
| Output Characteristics: | 3-STATE |
| Maximum Seated Height: | 2.16 mm |
| Programming Voltage (V): | 2.7 |
| Minimum Supply Voltage (Vsup): | 2.3 V |
| Surface Mount: | YES |
| Maximum Supply Current: | 14 mA |
| Terminal Finish: | TIN |
| No. of Terminals: | 8 |
| Maximum Clock Frequency (fCLK): | 133 MHz |
| No. of Words: | 134217728 words |
| Terminal Position: | DUAL |
| Package Style (Meter): | SMALL OUTLINE |
| Write Protection: | HARDWARE/SOFTWARE |
| Technology: | CMOS |
| JESD-30 Code: | S-PDSO-G8 |
| Package Shape: | SQUARE |
| Terminal Form: | GULL WING |
| Operating Mode: | SYNCHRONOUS |
| Maximum Operating Temperature: | 105 Cel |
| Endurance: | 100000 Write/Erase Cycles |
| Package Code: | SOP |
| Width: | 5.28 mm |
| Moisture Sensitivity Level (MSL): | 1 |
| Serial Bus Type: | 4-WIRE |
| Other Names: | 706-1341 |
| Memory Density: | 134217728 bit |
| Memory IC Type: | FLASH |
| JESD-609 Code: | e3 |
| Minimum Operating Temperature: | -40 Cel |
| Memory Width: | 1 |
| No. of Functions: | 1 |
| Package Equivalence Code: | SOP8,.3 |
| Alternate Memory Width: | 1 |
| Length: | 5.28 mm |
| No. of Words Code: | 128M |
| Nominal Supply Voltage / Vsup (V): | 3 |
| Minimum Data Retention Time: | 20 |
| Parallel or Serial: | SERIAL |
| Terminal Pitch: | 1.27 mm |
| Temperature Grade: | INDUSTRIAL |
| Maximum Supply Voltage (Vsup): | 3.6 V |
