Intel Corporation - SE7505VB2

Safety:

• Class A EMC regulatory compliance (based on board configured in a compatible Intel host system)
• Verified to AS/NZS 3548, Class A (C-tick Mark) (Australia/New Zealand)
• CSA 60950 / Verified to ICES-003, ClassA (Canada)
• EN60950 / Verified to EN55022 (Class A) and EN55024 (CE Mark-EU Directive 89/336/EEC) (Europe)
• IEC60950 / CISPR 22 (International)
• Verified to CISPR-22/VCCI, Class A (Japan)
• Certification to MIC Notices 1997-41 & 1997-42 (Korea)
• GOSTR 50377-92 / Verified to GOSTR 29216-91, GOSTR 50628-95 (Russia)
• Verified to BSMI 13438, Class A (Taiwan)
• UL 60950 / Verified to FCC, Class A (United States)

• Intel SE7505VB2 Server Board
• Quick Start User Guide
• Cable kit
• I/O shield
• Board stickers (reference, I/O, and warning)

Software CD Includes:

• LANDesk Client Manager
• Software drivers
• Configuration tools
• Intel SMaRT tool software
• Technical product information

Memory Subsystem:

• ECC single-bit errors (SBE) will be corrected and multiple-bit error (MBE) will be detected
• Supports Intel x4 SDDC with x4 DIMMs
• The minimum memory capacity is 128 MB
• Intel E7505 Chipset:
• The Memory Control Hub accepts access requests from the host (processor) bus and directs those accesses to memory or to one of the PCI buses. The MCH monitors the host bus, examining addresses for each request. Accesses may be directed to a memory request queue for subsequent forwarding to the memory subsystem, or to an outbound request queue for subsequent forwarding to one of the PCI buses. The MCH also accepts inbound requests from the P64H2 and the ICH4. The MCH is responsible for generating the appropriate controls to control data transfer to and from memory.
• The PCI-X 64bit Hub 2.0 I/O Bridge P64H2 provides the interface for two PCIX buses capable of 133MHz operation. The P64H2 is both master and target on both buses.
• The I/O Controller Hub 4 (ICH4) controller has several components. It provides the interface for a 32-bit/33-MHz PCI bus. The ICH4 can be both a master and a target on that PCI bus. The ICH4 also includes a USB 2.0 controller and an IDE controller. The ICH4 is also responsible for much of the power management functions, with ACPI control registers built in. The ICH4 also provides a number of GPIO pins and has the LPC bus to support low speed legacy I/O.

Serial ATA Controller:

• Automatically selects highest available transfer speed for all devices
• Supports:

• UDMA up to 150MB/second
• All UDMA and PIO modes
• Up to two SATA devices
• ACPI and ATA/ATAPI6

• On-line mirror rebuilding
• RAID set accommodates multiple size HDDs
• HDDs function normally when not in RAID sets
• Adjustable stripe size for RAID 0

Video Controller:

• The baseboard provides an ATI Rage XL PCI graphics accelerator, along with 8 MB of video SDRAM and support circuitry for an embedded SVGA video subsystem. The ATI Rage XL chip contains a SVGA video controller, clock generator, 2D and 3D engine, and RAMDAC in a 272- pin PBGA. One 2Mx32 SDRAM chip provides 8 MB of video memory.
• The SVGA subsystem supports a variety of modes, up to 1600 x 1200 resolution in 8/16/24/32 bpp modes under 2D, and up to 1024 x 768 resolution in 8/16/24/32 bpp modes under 3D. It supports both CRT and LCD monitors with up to 100 Hz vertical refresh rate.

Network Interface Controller (NIC):

• 82550PM:

• Glueless 32-bit PCI, CardBus master interface (Direct Drive of Bus), compatible with PCI local Bus Specification, Revision 2.2.
• Integrated IEEE 802.3 10Base-T and 100Base-TX compatible PHY
• IEEE 820.3u auto-negotiation support
• Full duplex support at both 10 Mbps and 100 Mbps operation
• Integrated UNDI ROM support
• MDI/MDI-X and HWI support
• Low power +3.3 V device

• 82540EM:

• Support for the 33/66MHz bus segment
• Integrated 10/100/1000 Mb/s full and half duplex operation
• Compliant with PCI Power Management v1.1 and ACPI v2.0

Deliver the performance, quality, and reliability that are vital for both server and workstation applications using the Intel Server Board SE7505VB2. With dual Intel Xeon processors supporting up to 2 MB L3 cache, a 533MHz system bus, and the Intel E7505 chipset, the powerful and versatile Server Board SE7505VB2 enables you to create a broad range of systems that deliver high-end processing to solutions ranging from entry-level to enterprise-critical.

The Intel Server Board SE7505VB2 extends the bandwidth and performance-enhancing features of Intel NetBurst microarchitecture and Intel Hyper-Threading Technology in a package ideally suited to the unpredictable computing demands of growing businesses. In addition, dual integrated Intel PRO Network Connections, three independent PCI buses, integrated Serial ATA and support for 1.5V AGP 8X Pro50 cards provides the scalable networking, flexible storage options, and powerful graphics capabilities needed to meet a vast assortment of business challenges.