ICL7107CM44T by Intersil | Converters

Image shown is a representation only.

Manufacturer	Intersil
Manufacturer's Part Number	ICL7107CM44T
Description	ADC, DUAL-SLOPE; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE;
Datasheet	ICL7107CM44T Datasheet

NAME	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Nominal Supply Voltage:	5 V
Maximum Seated Height:	0.096 in (2.45 mm)
Sub-Category:	Analog to Digital Converters
Output Format:	Parallel, Word
Surface Mount:	Yes
Terminal Finish:	Tin Lead
No. of Terminals:	44
Maximum Analog Input Voltage:	2 V
Terminal Position:	Quad
Package Style (Meter):	Flatpack
Technology:	CMOS
JESD-30 Code:	S-PQFP-G44
Package Shape:	Square
Terminal Form:	Gull Wing
Maximum Operating Temperature:	70 °C (158 °F)
Package Code:	QFP
Width:	0.394 in (10 mm)
Moisture Sensitivity Level (MSL):	4
No. of Bits:	3
Converter Type:	Analog To Digital Converter, Dual-Slope
Output Bit Code:	Binary
JESD-609 Code:	e0
Minimum Operating Temperature:	0 °C (32 °F)
Maximum Linearity Error (EL):	0.0015 %
No. of Functions:	1
Qualification:	No
Package Equivalence Code:	QFP44,.5SQ,32
No. of Analog In Channels:	1
Length:	0.394 in (10 mm)
Nominal Negative Supply Voltage:	-5 V
Terminal Pitch:	0.031 in (0.8 mm)
Temperature Grade:	Commercial
Minimum Analog Input Voltage:	0 mV
Power Supplies (V):	±5 V

Popular Products

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.

Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.

FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.

Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.

ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.

IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.

NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.