Image shown is a representation only.
| Manufacturer | ITT Cannon |
|---|---|
| Manufacturer's Part Number | 7201J1V4QE2 |
| Description | ROCKER SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DPDT; Type (Actuator): ROCKER; Contact Function: ON-ON; Solderability: MIL-STD; |
| Datasheet | 7201J1V4QE2 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | 5 A |
| Center Contact Plating: | SILVER |
| Center Contact Material: | COPPER ALLOY |
| Housing Material: | STAINLESS STEEL |
| Type (Actuator): | ROCKER |
| Maximum AC Contact Voltage: | 250 V |
| Solderability: | MIL-STD |
| Finish (Actuator): | MATTE |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 100000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Manufacturer Series: | 7000 |
| Material (Actuator): | NYLON |
| Contact Resistance: | 10 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Color (Actuator): | BLACK |
| Maximum AC Contact Current: | 2 A |
| End Contact Material: | SILVER |
| Angle (Actuator): | 25 deg |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | 5A@28VDC |
| Dielectric Withstand Volts (V): | 1000VRMS |
| Contact Function: | ON-ON |
| PCB Hole Count: | 10 |
| Switch Type: | ROCKER SWITCH |
| AC Maximum Rating R Load (Contact): | 2A@250VAC |
| Sealing: | EPOXY |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Body Width: | 11.43 inch |
| Switch Function: | DPDT |
| Terminal Length: | .185 inch |
| Length (Actuator): | .299 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | GLASS FILLED NYLON |
| Body Height: | 32.4104 mm |
| Body Length/Diameter: | 15.748 mm |
| Washability: | PARTIAL |
