Image shown is a representation only.
| Manufacturer | ITT Cannon |
|---|---|
| Manufacturer's Part Number | 8121SD9AGE |
| Description | Other Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PUSHBUTTON; Contact Function: ON-(ON); Solderability: MIL-STD; |
| Datasheet | 8121SD9AGE Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | 1 A |
| Center Contact Plating: | GOLD OVER NICKEL |
| Type (Bushing): | UNTHREADED |
| Length (Bushing): | .28 inch |
| Housing Material: | STAINLESS STEEL |
| Type (Actuator): | PUSHBUTTON |
| Maximum AC Contact Voltage: | 120 V |
| Solderability: | MIL-STD |
| Terminal Finish: | GOLD/NICKEL |
| Switch Action: | VERTICAL |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 60000 Cycle(s) |
| Maximum Operating Temperature: | 75 Cel |
| Manufacturer Series: | 8020 |
| Material (Actuator): | GLASS FILLED NYLON |
| Contact Resistance: | 50 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | 1 A |
| End Contact Material: | SILVER |
| Angle (Actuator): | 0 deg |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | 1A@28VDC |
| Dielectric Withstand Volts (V): | 1000VAC |
| Contact Function: | ON-(ON) |
| PCB Hole Count: | 5 |
| DC Maximum Power Rating R Load (Contact): | 0.4VA@20VDC |
| AC Maximum Rating R Load (Contact): | 1A@120VAC |
| Sealing: | EPOXY |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 6.858 inch |
| Switch Function: | SPDT |
| Terminal Length: | .125 inch |
| Length (Actuator): | .228 inch |
| End Contact Plating: | GOLD OVER NICKEL |
| Insulator Material: | GLASS FILLED NYLON |
| Body Height: | 26.2382 mm |
| Body Length/Diameter: | 12.7 mm |
| Washability: | PARTIAL |
| Diameter (Bushing): | .25 inch |
