Image shown is a representation only.
| Manufacturer | ITT Cannon |
|---|---|
| Manufacturer's Part Number | DBMM-25P-A101 |
| Description | D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body or Shell Style: PLUG; MIL Conformity: NO; |
| Datasheet | DBMM-25P-A101 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Mating Contact Finish: | NOT SPECIFIED |
| Maximum Wire Size: | 20 AWG |
| IEC Conformity: | NO |
| Empty Shell: | NO |
| Shell Finish: | CADMIUM |
| Minimum Wire Size: | 28 AWG |
| MIL Conformity: | NO |
| No. of Rows Loaded: | 2 |
| Termination Type: | SOLDER |
| Body Length: | 2.088 inch |
| Contact Gender: | MALE |
| Connector Type: | D SUBMINIATURE CONNECTOR |
| Contact Material: | NOT SPECIFIED |
| Mounting Option-1: | HOLE .12 |
| Mounting Option-2: | LOCKING |
| UL Flammability Code: | 94V-0 |
| Mixed Contacts: | NO |
| Contact Style: | RND PIN-SKT |
| Filter Feature: | NO |
| Mating Contact Row Spacing (inch): | 0.112 |
| Mounting Type: | CABLE AND PANEL |
| Body Depth: | .186 inch |
| Total No. of Contacts: | 25 |
| Body Width: | .494 inch |
| Termination Contact Finish: | NOT APPLICABLE |
| Rated Current - Signal: | 5 A |
| No. of Connectors: | ONE |
| Insulator Material: | PCT-POLYESTER/POLYETHYLENE |
| Option: | GENERAL PURPOSE |
| Contact Pattern: | STAGGERED |
| Mating Contact Pitch (inch): | 0.109 |
| Shell Material: | CARBON STEEL |
| Shell Size: | 3/B |
| Body or Shell Style: | PLUG |
| DIN Conformance: | NO |
