ET01MD1AVBE by ITT Cannon | Switches

Image shown is a representation only.

Manufacturer	ITT Cannon
Manufacturer's Part Number	ET01MD1AVBE
Description	TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): TOGGLE BAT; Contact Function: ON-ON; Solderability: MIL-STD;
Datasheet	ET01MD1AVBE Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.02 A
Center Contact Plating:	GOLD OVER NICKEL
Center Contact Material:	COPPER ALLOY
Type (Bushing):	UNTHREADED
Length (Bushing):	.177 inch
Housing Material:	GLASS FILLED NYLON
Type (Actuator):	TOGGLE BAT
Maximum AC Contact Voltage:	20 V
Solderability:	MIL-STD
Terminal Finish:	Gold (Au) - with Nickel (Ni) barrier
Finish (Actuator):	CHROME
Switch Action:	LATCHED
Terminal Material:	COPPER ALLOY
Termination Type:	SOLDER
Electrical Life:	60000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Manufacturer Series:	ET
Material (Actuator):	BRASS
Contact Resistance:	10 mohm
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	.02 A
End Contact Material:	COPPER ALLOY
Angle (Actuator):	25 deg
Maximum DC Contact Voltage:	20 V
DC Maximum Rating R Load (Contact):	.02A@20VDC
Dielectric Withstand Volts (V):	1000VRMS
Contact Function:	ON-ON
PCB Hole Count:	4
DC Maximum Power Rating R Load (Contact):	0.4VA@20VDC
Switch Type:	TOGGLE SWITCH
AC Maximum Rating R Load (Contact):	.02A@20VAC
Sealing:	EPOXY TERMINAL SEALED; IP57
JESD-609 Code:	e4
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	THROUGH HOLE-RIGHT ANGLE
Body Width:	6.22 inch
Switch Function:	SPDT
Terminal Length:	.125 inch
Length (Actuator):	.24 inch
End Contact Plating:	GOLD OVER NICKEL
Insulator Material:	GLASS FILLED NYLON
Body Height:	8.13 mm
Body Length/Diameter:	9.27 mm
Diameter (Bushing):	.18 inch

Popular Products

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;

LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;

RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.