Image shown is a representation only.
| Manufacturer | ITT Cannon |
|---|---|
| Manufacturer's Part Number | MC00L1NZQD |
| Description | ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SP12T; Type (Actuator): LONG FLATTED; Solderability: MIL-STD; Material (Actuator): ZINC ALLOY; |
| Datasheet | MC00L1NZQD Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .25 A |
| No. of Positions: | 12 |
| Center Contact Plating: | SILVER |
| Center Contact Material: | COPPER ALLOY |
| Type (Bushing): | 1/4-28 |
| Length (Bushing): | .25 inch |
| Housing Material: | ZINC ALLOY |
| Type (Actuator): | LONG FLATTED |
| Maximum AC Contact Voltage: | 125 V |
| Solderability: | MIL-STD |
| Terminal Finish: | Silver (Ag) |
| Finish (Actuator): | NICKEL |
| Switch Action: | LATCHED |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Manufacturer Series: | MC00 |
| Material (Actuator): | ZINC ALLOY |
| Contact Resistance: | 20 mohm |
| Insulation Resistance: | 10000000000 ohm |
| Maximum AC Contact Current: | .25 A |
| End Contact Material: | COPPER ALLOY |
| No. of Switch Sections: | 1 |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | .25A@28VDC |
| Dielectric Withstand Volts (V): | 600VRMS |
| Switch Type: | ROTARY SWITCH |
| AC Maximum Rating R Load (Contact): | .25A@125VAC |
| Indexing Angle: | 30 deg |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | PANEL MOUNT-THREADED |
| Body Width: | 0 inch |
| Switch Function: | SP12T |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Terminal Length: | .215 inch |
| Length (Actuator): | .4 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | DIALLYL PHTHALATE |
| Body Height: | 9.4 mm |
| Body Length/Diameter: | 13.34 mm |
| Washability: | PARTIAL |
| Diameter (Bushing): | .25 inch |
