
Image shown is a representation only.
Manufacturer | ITT Cannon |
---|---|
Manufacturer's Part Number | T101MH9ABE |
Description | TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): TOGGLE BAT; Contact Function: ON-ON; Solderability: MIL-STD; |
Datasheet | T101MH9ABE Datasheet |
NAME | DESCRIPTION |
---|---|
Maximum DC Contact Current: | .02 A |
Center Contact Plating: | GOLD |
Center Contact Material: | COPPER ALLOY |
Type (Bushing): | UNTHREADED |
Length (Bushing): | .24 inch |
Housing Material: | STAINLESS STEEL |
Type (Actuator): | TOGGLE BAT |
Maximum AC Contact Voltage: | 20 V |
Solderability: | MIL-STD |
Terminal Finish: | Gold (Au) - with Nickel (Ni) barrier |
Finish (Actuator): | CHROME |
Switch Action: | LATCHED |
Terminal Material: | COPPER ALLOY |
Termination Type: | SOLDER |
Electrical Life: | 60000 Cycle(s) |
Maximum Operating Temperature: | 85 Cel |
Manufacturer Series: | T |
Material (Actuator): | BRASS |
Contact Resistance: | 20 mohm |
Insulation Resistance: | 1000000000 ohm |
Maximum AC Contact Current: | .02 A |
End Contact Material: | COPPER ALLOY |
Angle (Actuator): | 25 deg |
Maximum DC Contact Voltage: | 20 V |
DC Maximum Rating R Load (Contact): | .02A@20VDC |
Dielectric Withstand Volts (V): | 1000VRMS |
Contact Function: | ON-ON |
PCB Hole Count: | 5 |
DC Maximum Power Rating R Load (Contact): | 0.4VA@20VDC |
Switch Type: | TOGGLE SWITCH |
AC Maximum Rating R Load (Contact): | .02A@20VAC |
Sealing: | EPOXY TERMINAL SEALED |
JESD-609 Code: | e4 |
Minimum Operating Temperature: | -30 Cel |
Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
Body Width: | 8.13 inch |
Switch Function: | SPDT |
Terminal Length: | .125 inch |
Length (Actuator): | .21 inch |
End Contact Plating: | GOLD OVER NICKEL |
Insulator Material: | GLASS FILLED NYLON |
Body Height: | 5.08 mm |
Body Length/Diameter: | 9.09 mm |
Washability: | SOLVENT |
Diameter (Bushing): | .19 inch |