16-104 by Itw Mcmurdo Connectors | Switches

Image shown is a representation only.

Manufacturer	Itw Mcmurdo Connectors
Manufacturer's Part Number	16-104
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Maximum Operating Temperature: 135 Cel; Body Height: 11.2 mm; Termination Type: SOLDER;
Datasheet	16-104 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	10 A
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	10A@28VDC
Maximum Operating Force:	2.22 N
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	250 V
Maximum Pre Travel:	1.27 mm
AC Maximum Rating R Load (Contact):	10A@250VAC
Sealing:	IP40
Minimum Operating Temperature:	-54 Cel
Mounting Feature:	PANEL MOUNT
Actuator Travel (mm):	1.57
Body Width:	6.4 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	SOLDER
Electrical Life:	50000 Cycle(s)
Body Height:	11.2 mm
Body Length/Diameter:	19.84 mm
Maximum Operating Temperature:	135 Cel
Manufacturer Series:	16
Maximum AC Contact Current:	10 A

Popular Products

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.