Image shown is a representation only.
| Manufacturer | Itw Switches |
|---|---|
| Manufacturer's Part Number | JSA4-1-G0 |
| Description | JUMPER SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Type (Actuator): SLIDER; Contact Function: ON-OFF; Solderability: HAND/REFLOW; End Contact Plating: GOLD COBALT; |
| Datasheet | JSA4-1-G0 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Center Contact Plating: | GOLD COBALT |
| Center Contact Material: | PHOSPHOR BRONZE |
| Housing Material: | POLYAMIDE/POLYTETRAFLUOROETHYLENE |
| Type (Actuator): | SLIDER |
| Maximum AC Contact Voltage: | 100 V |
| Solderability: | HAND/REFLOW |
| Switch Action: | LATCHED |
| Terminal Material: | COPPER ZINC |
| Termination Type: | SOLDER |
| Electrical Life: | 1000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Material (Actuator): | GLASS FILLED POLYBUTYLENE TEREPHTHALATE |
| Contact Resistance: | 15 mohm |
| Insulation Resistance: | 10000000000 ohm |
| Color (Actuator): | YELLOW |
| Maximum AC Contact Current: | 1 A |
| End Contact Material: | COPPER ZINC |
| Dielectric Withstand Volts (V): | 500VRMS |
| Contact Function: | ON-OFF |
| PCB Hole Count: | 2 |
| Switch Type: | JUMPER SWITCH |
| AC Maximum Rating R Load (Contact): | 1A@100VAC |
| Minimum Operating Temperature: | -55 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Terminal Length: | .142 inch |
| End Contact Plating: | GOLD COBALT |
| Insulator Material: | POLYAMIDE/POLYTETRAFLUOROETHYLENE |
| Body Height: | 8.4 mm |
| Additional Features: | JUMPER SWITCH |
| Body Length/Diameter: | 6.1 mm |
| AC Maximum Power Rating R Load (Contact): | 10VA@100VAC |
