KEMET Corporation - B-06-R-25

Murata Manufacturing's NFE61HT332Z2A9L is a DATA LINE FILTER with 100V rated voltage, 3300uF capacitance, and 2A rated current. It is used in automotive applications due to AEC-Q200 screening level and operates b/w -55°C to 125°C temperature range.

BLM18SG121TN1J by Murata Manufacturing is a chip bead data line filter with 2 terminals and a case code of 0603. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used for noise suppression in electronic circuits.

Murata Manufacturing's BLM18AG102SN1 is a FERRITE CHIP filter with 2 terminals, rated for 0.4A current and 1000Ω output impedance. Operating b/w -55°C to 125°C, it has dimensions of L1.6xB0.8xH0.8 (mm) and is ideal for data line filtering in surface mount applications.

Murata Manufacturing's BLM31PG500SN1L is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.025 ohm. Ideal for applications requiring a 50 OHM output impedance, this ferrite chip filter is designed for surface mount installation in various electronic devices.

CM2021Y330R-10 by Laird Technologies is a data line filter with 2 functions and 4 terminals. It has a max DC resistance of 0.0008 ohm and an output impedance of 33 ohm. This surface mount filter is suitable for applications requiring a rated current of 15 A.

Murata Manufacturing's BLM18KG601SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.15 ohm and output impedance of 600 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 1.3A and is commonly used in electronic devices requiring noise suppression on data lines.

DATA LINE FILTER; Construction: Chip Bead; Maximum DC Resistance: .0007 ohm; Maximum Frequency: 10 MHz; Material: Ferrite; Rated Current: 10 A;

DATA LINE FILTER; Maximum DC Resistance: .01 ohm; Rated Current: 10 A; Rated Voltage: 200 V; No. of Functions: 1; Additional Features: PI-TYPE CIRCUIT;

Murata Manufacturing's BLM18BD182SN1D is a chip bead data line filter with 2 terminals, rated current of 0.05A, and output impedance of 1800 ohm. It operates b/w -55 to 125 °C and has dimensions of L1.6XB0.8XH0.8 (mm). Ideal for surface mount applications in filtering frequencies from 100 MHz with max DC resistance of 1.5 ohm.

Murata Manufacturing's BLM21PG331BH1D is a FERRITE CHIP filter with 2 terminals, AEC-Q200 compliant. It offers 330 OHM output impedance, 0.07 ohm DC resistance, and 0.01 A rated current. Ideal for data line filtering applications with a temperature range of -55 to 150 °C.

The TDK MMZ1608S102ATA00 is a chip bead data line filter with 2 terminals, FERRITE CHIP construction, and 0.5 ohm max DC resistance. It operates b/w -55 to 125 °C and has an output impedance of 1000 OHM. Ideal for surface mount applications in electronics for noise suppression and signal filtering.

PA3747.505NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 3330 uH inductance. It operates b/w -40 to 125 °C and has a max DC resistance of 0.1035 ohm. Ideal for applications requiring high output impedance like automotive electronics.

TDK's MPZ1608S601AT is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, this ferrite chip has a DC resistance of 0.15 ohm and output impedance of 600 OHM.

TDK's ACP3225-501-2P-T000 is a FERRITE CHIP filter with 2 functions, rated at 60V and 2A. With dimensions of L3.2xB2.5xH1.9 (mm), it offers high insulation resistance for data line filtering applications in various electronic devices.

ACM4520-901-2P-T000 by TDK is a Data Line Filter with 2 functions, rated at 50V and 2A. It offers high insulation resistance of 10 Mohm, low DC resistance of 0.06 ohm, and output impedance of 900 ohm. Ideal for applications requiring noise suppression in data lines with operating temperatures from -40 to 85°C.

The Wurth Elektronik & Kg 742792624 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter has dimensions of L1.6XB0.8XH0.8 (mm) and is suitable for applications requiring a rated current of 1.5 A and an output impedance of 180 ohm.

SZEMI2121MTTAG by Onsemi is a Data Line Filter with 8 terminals, rated for 0.1A current. It operates b/w -40°C to 85°C and has matte tin finish. With dimensions of 2.2mm x 2.0mm x 0.8mm, it's ideal for applications requiring surface mount filters in electronic devices.

Murata Manufacturing's BLM18EG221SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 260 ohm at frequencies ranging from 100 MHz to 1000 MHz.

LI0805H121R-10 by Laird Technologies is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min frequency of 25 MHz. This filter is commonly used in applications requiring noise suppression in data lines.

The TDK MMZ2012R102AT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.3 ohm and output impedance of 1000 OHM, suitable for surface mount applications in various electronic devices.