MPLCV1054L100 by KEMET Corporation | Inductors

Image shown is a representation only.

Manufacturer	KEMET Corporation
Manufacturer's Part Number	MPLCV1054L100
Description	GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
Datasheet	MPLCV1054L100 Datasheet

NAME	DESCRIPTION
Case or Size Code:	4539
Surface Mount:	Yes
Inductor Type:	General Purpose Inductor
Shielded:	Yes
Terminal Placement:	Dual Ended
No. of Terminals:	2
DC Resistance:	25 mΩ
Nominal Inductance (L):	10 μH
Package Style (Meter):	SMT
Core Material:	Composite
Package Height:	0.213 in (5.4 mm)
Test Frequency:	100 kHz
Maximum Operating Temperature:	155 °C (311 °F)
Special Feature:	DC Resistance is measured at 20%
Construction:	Rectangular
Shape or Size Description:	Rectangular Package
Packing Method:	Tape and Reel, Plastic, 15 in
Tolerance:	20 %
Package Length:	0.453 in (11.5 mm)
Minimum Operating Temperature:	-55 °C (-67 °F)
Inductor Application:	Power Inductor
Maximum Rated Current:	7.1 A
No. of Functions:	1
Terminal Shape:	J Bend
Reference Standard:	AEC-Q200
Package Width:	0.394 in (10 mm)

Popular Products

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.