Image shown is a representation only.
| Manufacturer | Kingston Technology Company |
|---|---|
| Manufacturer's Part Number | HX426S15IB2/8 |
| Description | Kingston; Product Line: HyperX Impact; Product Type: RAM Module; Memory Size: 8 GB; Memory Technology: DDR4 SDRAM; Shipping Height: 6.75 "; |
| NAME | DESCRIPTION |
|---|---|
| Product Name: | HyperX Impact 8GB DDR4 SDRAM Memory Module |
| Limited Warranty: | Lifetime |
| Shipping Width: | 2.25 " |
| Error Checking: | Non-ECC |
| Signal Processing: | Unbuffered |
| Memory Voltage: | 1.2 V |
| Brand Name: | Kingston |
| Form Factor: | SoDIMM |
| Memory Technology: | DDR4 SDRAM |
| Marketing Information: | HyperX HX426S15IB2/8 is a 1G x 64-bit (8GB) DDR4-2666 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit DDR4 FBGA components. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. This module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V. Additional timing parameters are shown in the PnP Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows: |
| CAS Latency: | CL15 |
| Memory Size: | 8 GB |
| Length: | 69.60 mm |
| Product Type: | RAM Module |
| Number of Pins: | 260-pin |
| Memory Speed: | 2666 MHz |
| Shipping Weight (Approximate): | 0.114 lb |
| Shipping Depth: | 0.55 " |
| Width: | 30 mm |
| Country of Origin: | China |
| Product Line: | HyperX Impact |
| Memory Standard: | DDR4-2666/PC4-21300 |
| Shipping Height: | 6.75 " |
