
Image shown is a representation only.
Manufacturer | Knitter-switch |
---|---|
Manufacturer's Part Number | ATE1D-RA |
Description | TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Solderability: WAVE; |
Datasheet | ATE1D-RA Datasheet |
NAME | DESCRIPTION |
---|---|
Maximum DC Contact Current: | .05 A |
Center Contact Plating: | GOLD OVER NICKEL |
Center Contact Material: | PHOSPHOR BRONZE |
Length (Bushing): | .157 inch |
Housing Material: | STEEL |
Type (Actuator): | TOGGLE |
Solderability: | WAVE |
Finish (Actuator): | CHROME |
Terminal Material: | PHOSPHOR BRONZE |
Termination Type: | SOLDER |
Electrical Life: | 40000 Cycle(s) |
Maximum Operating Temperature: | 85 Cel |
Material (Actuator): | BRASS |
Contact Resistance: | 50 mohm |
Insulation Resistance: | 1000000000 ohm |
End Contact Material: | PHOSPHOR BRONZE |
Maximum DC Contact Voltage: | 48 V |
DC Maximum Rating R Load (Contact): | 0.05A@48VDC |
Dielectric Withstand Volts (V): | 700VAC |
Contact Function: | ON-ON |
PCB Hole Count: | 5 |
DC Maximum Power Rating R Load (Contact): | 0.4VA@48VDC |
Switch Type: | TOGGLE SWITCH |
Sealing: | EPOXY |
Minimum Operating Temperature: | -20 Cel |
Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
Body Width: | 5.0038 inch |
Switch Function: | SPDT |
Contact Timing: | QUICK-MAKE/-BREAK |
Length (Actuator): | .236 inch |
End Contact Plating: | GOLD OVER NICKEL |
Insulator Material: | GLASS FILLED POLYBUTYLENE TEREPHTHALATE |
Body Height: | 7.9248 mm |
Body Length/Diameter: | 9.4996 mm |
Diameter (Bushing): | .157 inch |