
Image shown is a representation only.
Manufacturer | Knitter-switch |
---|---|
Manufacturer's Part Number | TMSE10 |
Description | KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; Solderability: REFLOW; Center Contact Plating: SILVER; |
Datasheet | TMSE10 Datasheet |
NAME | DESCRIPTION |
---|---|
Maximum DC Contact Current: | .1 A |
Center Contact Plating: | SILVER |
Housing Material: | STAINLESS STEEL |
Type (Actuator): | PUSHBUTTON |
Solderability: | REFLOW |
Terminal Finish: | Gold (Au) |
Switch Action: | MOMENTARY |
Termination Type: | SOLDER |
Electrical Life: | 100000 Cycle(s) |
Maximum Operating Temperature: | 125 Cel |
Material (Actuator): | SILICON RUBBER |
Contact Resistance: | 100 mohm |
Insulation Resistance: | 100000000 ohm |
Maximum DC Contact Voltage: | 24 V |
DC Maximum Rating R Load (Contact): | 0.1A@24VDC |
Dielectric Withstand Volts (V): | 250VAC |
Maximum Operating Force: | 4 N |
Switch Type: | KEYPAD SWITCH |
JESD-609 Code: | e4 |
Minimum Operating Temperature: | -55 Cel |
Mounting Feature: | SURFACE MOUNT-STRAIGHT |
Body Width: | 4.9276 inch |
Switch Function: | SPST |
Circuit Config: | 1X1 |
Length (Actuator): | .064 inch |
End Contact Plating: | SILVER |
Insulator Material: | THERMOPLASTIC NYLON |
Body Height: | 2.54 mm |
Body Length/Diameter: | 5.0038 mm |
No. of Switches: | 1 |