Image shown is a representation only.
| Manufacturer | Knitter-switch |
|---|---|
| Manufacturer's Part Number | TSSE67R |
| Description | KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; Contact Function: OFF-(ON); Solderability: REFLOW; |
| Datasheet | TSSE67R Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .05 A |
| Center Contact Plating: | SILVER |
| Center Contact Material: | PHOSPHOR BRONZE |
| Housing Material: | STAINLESS STEEL |
| Type (Actuator): | STEM |
| Solderability: | REFLOW |
| Terminal Finish: | Silver (Ag) |
| Actuator Travel (mm): | .4572 |
| Switch Action: | MOMENTARY-TACTILE |
| Terminal Material: | BRASS |
| Termination Type: | SOLDER |
| Electrical Life: | 500000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Material (Actuator): | SILICON RUBBER |
| Contact Resistance: | 100 mohm |
| Insulation Resistance: | 100000000 ohm |
| Color (Actuator): | RED |
| End Contact Material: | PHOSPHOR BRONZE |
| Angle (Actuator): | 0 deg |
| Maximum DC Contact Voltage: | 32 V |
| DC Maximum Rating R Load (Contact): | .05A@32VDC |
| Dielectric Withstand Volts (V): | 250VAC |
| Contact Function: | OFF-(ON) |
| Maximum Operating Force: | 2.6 N |
| Packing Method: | TR |
| Switch Type: | KEYPAD SWITCH |
| Sealing: | IP67 |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -40 Cel |
| Mounting Feature: | SURFACE MOUNT-STRAIGHT |
| Body Width: | 6.2 inch |
| Switch Function: | SPST |
| Circuit Config: | 1X1 |
| End Contact Plating: | SILVER |
| Insulator Material: | NYLON |
| Body Height: | 2.85 mm |
| Body Length/Diameter: | 6.3 mm |
| No. of Switches: | 1 |
