GLX-N-44M by Kycon | Connectors

Image shown is a representation only.

Manufacturer	Kycon
Manufacturer's Part Number	GLX-N-44M
Description	TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Termination Type: SOLDER;
Datasheet	GLX-N-44M Datasheet

NAME	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
IEC Conformity:	NO
Sub-Category:	Telecom and Datacom Connectors
Empty Shell:	NO
MIL Conformity:	NO
Termination Type:	SOLDER
Contact Gender:	FEMALE
Connector Type:	TELECOM AND DATACOM CONNECTOR
Contact Material:	NOT SPECIFIED
Mounting Option-1:	LOCKING
Contact Resistance:	20 mohm
Insulation Resistance:	500000000 ohm
UL Flammability Code:	94V-0
Mounting Style:	RIGHT ANGLE
Other Names:	2092-GLX-N-44M
Mixed Contacts:	NO
No. of Ports:	1
Plating Thickness (inch):	FLASH
Contact Style:	TELCOM, MODULAR
Filter Feature:	NO
Mounting Type:	BOARD
Body Depth:	.591 inch
Total No. of Contacts:	4
Body Width:	.567 inch
Dielectric Withstanding Voltage (V):	1400VAC
Terminal Pitch (mm):	2.032
Terminal Length:	.138 inch
Rated Current - Signal:	1.5 A
Insulator Material:	POLYBUTYLENE TEREPHTHALATE/POLYETHYLENE
Insulator Color:	GRAY
Reference Standard:	CSA, UL
Option:	GENERAL PURPOSE
Body or Shell Style:	JACK
Reliability:	COMMERCIAL
Board Mounting Option:	SPLIT BOARD LOCK
DIN Conformance:	NO

Popular Products

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;