Laird Technologies - CMX1616Z401B-10

DATA LINE FILTER; Maximum DC Resistance: .6 ohm; Mounting Type: THROUGH HOLE MOUNT; Height: 8.89 mm; No. of Functions: 2; Dimensions: L10.16XB5.08XH8.89 (mm)/L0.4XB0.2XH0.35 (inch);

ACM1211-102-2PL by TDK is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 85°C. Ideal for applications requiring high insulation resistance, low DC resistance, and surface mounting type.

Murata BLM15AG100SN1D is a chip bead data line filter with 2 terminals, rated for 1A current. It offers a DC resistance of 0.025 ohm and output impedance of 10 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronics to suppress noise and interference.

Semtech's ECLAMP2422N.TCT is a 5V data line filter with 2 functions and 6 terminals. It operates b/w -40°C to 85°C, offering 0.003uH inductance and 100uF capacitance. Ideal for IEC-approved applications requiring surface mount filters with dimensions of L1.45xB1.0xH0.58mm.

Murata Manufacturing's BLM18AG601SH1D is an AEC-Q200 compliant chip bead filter with 2 terminals, ideal for data line applications. With a max operating temperature of 125°C and DC resistance of 0.38 ohm, it offers effective filtering at frequencies ranging from 100 MHz. This surface mount ferrite chip measures L1.6xB0.8xH0.8 (mm) and is suitable for use in automotive electronics due to its high output impedance of 600 OHM.

Wurth Elektronik 742792625 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2A current. It has dimensions of L1.6xB0.8xH0.8 mm and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring output impedance of 120 ohm.

Murata Manufacturing's BLM18HE152SN1J is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of 1.6x0.8x0.8 mm, it offers a frequency range from 100 MHz to 1000 MHz and an output impedance of 1500 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.

Murata Manufacturing's BLM15EG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 0.095 ohm and output impedance of 120 ohm. Ideal for applications requiring filtering in the frequency range of 100-1000 MHz.

Murata Manufacturing's BLM18EG221SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 260 ohm at frequencies ranging from 100 MHz to 1000 MHz.

Murata Manufacturing DLW43SH510XK2K is a FERRITE CHIP filter with 51uH inductance, 10 Mohm insulation resistance, and rated for 0.23A current. It has 4 terminals, operates b/w -40 to 125 °C, and is AEC-Q200 compliant. Ideal for data line filtering applications requiring surface mount installation.

Murata Manufacturing's BLM21PG600SN1L is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2xB1.25xH0.85 (mm), it offers an output impedance of 60 ohm and max DC resistance of 0.025 ohm. Ideal for data line filtering applications, it operates b/w -55°C to 125°C temperatures in surface mount configurations.

ACM70V-701-2PL-TL00 by TDK is a data line filter with 2 functions and a rated voltage of 80V. It has a min insulation resistance of 10 Mohm and is suitable for applications requiring AEC-Q200 compliance.

HI3312X101R-10 by Laird Technologies is a Ferrite Chip Data Line Filter with 100 OHM output impedance, 10 A rated current, and operates b/w -40 to 125 °C. It is used for noise suppression in data lines, featuring surface mounting type and compact dimensions of L8.5XB3.05XH2.28 mm.

Murata Manufacturing DLW43SH510XK2L is a FERRITE CHIP data line filter with 51uH inductance, 10 Mohm insulation resistance, and AEC-Q200 screening. It has 4 terminals, rated for 50V voltage and 0.23A current. Ideal for automotive applications due to its compact size (L4.5xB3.2xH2.6 mm) and surface mounting type.

Murata BL01RN1A2A2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range, and 3.6mm diameter. It is used for noise suppression in electronic circuits through hole mounting applications.

The TDK MMZ1608Y152BTA00 is a chip bead data line filter with 2 terminals, rated for 0.3A current and 1500 ohm output impedance. It operates b/w -55°C to 125°C, with dimensions of 1.6x0.8x0.8mm (LxWxH). Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.

Wurth Elektronik 7427927115 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.0xB0.5xH0.5 (mm), it is ideal for surface mount applications in electronics to achieve an output impedance of 150 ohms.

Murata Manufacturing's DSS6NZ82A103Q55B is a 100V rated data line filter with 6A current capacity. It operates b/w -25°C to 85°C, measuring L8xB2.54xH7 mm in size. Ideal for applications requiring noise suppression in data lines, it offers a capacitance of 10000uF and through-hole mounting method.

DATA LINE FILTER MODULE; Rated Current: 7 A; Height: 12.2 mm; No. of Terminals: 5; Length: 25.41 mm; No. of Functions: 2;

Murata Manufacturing's BLM18KG601SN1J is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.15 ohm and output impedance of 600 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications requiring effective filtering in compact spaces.