Image shown is a representation only.
| Manufacturer | Lamb Industries |
|---|---|
| Manufacturer's Part Number | 1103-M2S3CQE2 |
| Description | SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): SLIDE; Contact Function: ON-OFF-ON; Minimum Operating Temperature: -30 Cel; |
| Datasheet | 1103-M2S3CQE2 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | 5 A |
| No. of Positions: | 3 |
| Center Contact Plating: | SILVER |
| Center Contact Material: | COPPER |
| Type (Actuator): | SLIDE |
| Maximum AC Contact Voltage: | 250 V |
| Switch Action: | MAINTAINED |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 50000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Manufacturer Series: | 1103 |
| Material (Actuator): | NYLON |
| Contact Resistance: | 10 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | 2 A |
| End Contact Material: | COPPER |
| Angle (Actuator): | 0 deg |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | 5A@28VDC |
| Dielectric Withstand Volts (V): | 1500VAC |
| Contact Function: | ON-OFF-ON |
| PCB Hole Count: | 3 |
| Switch Type: | SLIDE SWITCH |
| AC Maximum Rating R Load (Contact): | 2A@250VAC |
| Sealing: | EPOXY |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Body Width: | 6.096 inch |
| Switch Function: | SPDT |
| Terminal Length: | .265 inch |
| Length (Actuator): | .201 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | DIALLYL PHTHALATE |
| Body Height: | 6.2992 mm |
| Additional Features: | APPROVALS: UL,CSA |
| Body Length/Diameter: | 12.7 mm |
