5KP8.5A-2 by Littelfuse | Diodes

Image shown is a representation only.

Manufacturer	Littelfuse
Manufacturer's Part Number	5KP8.5A-2
Description	TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Datasheet	5KP8.5A-2 Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Breakdown Voltage:	10.4 V
Config:	SINGLE
Diode Type:	TRANS VOLTAGE SUPPRESSOR DIODE
Surface Mount:	NO
Terminal Finish:	MATTE TIN
JESD-609 Code:	e3
Diode Element Material:	SILICON
No. of Terminals:	2
Qualification:	Not Qualified
Terminal Position:	AXIAL
Package Style (Meter):	LONG FORM
Maximum Non Repetitive Peak Reverse Power Dissipation:	5000 W
Technology:	AVALANCHE
JESD-30 Code:	O-PALF-W2
Minimum Breakdown Voltage:	9.44 V
No. of Elements:	1
Package Shape:	ROUND
Maximum Power Dissipation:	8 W
Terminal Form:	WIRE
Polarity:	UNIDIRECTIONAL
Reference Standard:	UL LISTED
Case Connection:	ISOLATED
Moisture Sensitivity Level (MSL):	1

Popular Products

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;