CMA50P1600FC by Littelfuse | Triggering Devices

Image shown is a representation only.

Manufacturer	Littelfuse
Manufacturer's Part Number	CMA50P1600FC
Description	SCR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Case Connection: ISOLATED;
Datasheet	CMA50P1600FC Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Trigger Device Type:	SCR
Configuration:	SERIES CONNECTED, CENTER TAP, 2 ELEMENTS
Sub-Category:	Silicon Controlled Rectifiers
Surface Mount:	NO
Maximum Leakage Current:	3 mA
Terminal Finish:	MATTE TIN
Maximum Holding Current:	100 mA
No. of Terminals:	5
Terminal Position:	SINGLE
Package Style (Meter):	IN-LINE
JESD-30 Code:	R-PSIP-T5
No. of Elements:	2
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	150 Cel
Screw Terminals Description:	A-K-AK
Case Connection:	ISOLATED
Repetitive Peak Off-state Voltage:	1600 V
Maximum RMS On-state Current:	79 A
Repetitive Peak Reverse Voltage:	1600 V
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Non Repetitive Peak On-state Current:	780 A
Maximum DC Gate Trigger Voltage:	1.6 V
Maximum DC Gate Trigger Current:	80 mA
Quick Connects Description:	2G
Qualification:	Not Qualified
Maximum On-state Current:	50 A
Reference Standard:	UL RECOGNIZED

Popular Products

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;