IXDN609PI by Littelfuse | Interface ICs

Image shown is a representation only.

Manufacturer	Littelfuse
Manufacturer's Part Number	IXDN609PI
Description	BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet	IXDN609PI Datasheet

NAME	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	18 V
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	4.7 mm
Sub-Category:	MOSFET Drivers
Surface Mount:	NO
Terminal Finish:	Pure Tin (Sn)
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	CMOS
JESD-30 Code:	R-PDIP-T8
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	125 Cel
Package Code:	DIP
Interface IC Type:	BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER
Width:	7.62 mm
Turn-off Time:	.04 us
High Side Driver:	NO
Maximum Supply Voltage:	35 V
Turn-on Time:	.055 us
Nominal Output Peak Current Limit:	9 A
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	DIP8,.3
Length:	9.59 mm
Peak Reflow Temperature (C):	NOT SPECIFIED
Terminal Pitch:	2.54 mm
Temperature Grade:	AUTOMOTIVE
Power Supplies (V):	5/30

Popular Products

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.