Q7015R6 by Littelfuse | Triggering Devices

Image shown is a representation only.

Manufacturer	Littelfuse
Manufacturer's Part Number	Q7015R6
Description	ALTERNISTOR TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
Datasheet	Q7015R6 Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Trigger Device Type:	ALTERNISTOR TRIAC
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Configuration:	SINGLE
Sub-Category:	TRIACs
Surface Mount:	NO
Maximum Leakage Current:	.1 mA
Minimum Critical Rate of Rise of Off-state Voltage:	475 V/us
Maximum Holding Current:	70 mA
No. of Terminals:	3
Terminal Position:	SINGLE
Package Style (Meter):	FLANGE MOUNT
JESD-30 Code:	R-PSFM-T3
No. of Elements:	1
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	125 Cel
Case Connection:	MAIN TERMINAL 2
Repetitive Peak Off-state Voltage:	700 V
Maximum RMS On-state Current:	15 A
JEDEC-95 Code:	TO-220AB
Minimum Operating Temperature:	-40 Cel
Maximum DC Gate Trigger Voltage:	2.5 V
Maximum DC Gate Trigger Current:	80 mA
Qualification:	Not Qualified
Minimum Critical Rate of Rise of Commutation Voltage:	30 V/us
Additional Features:	HIGH RELIABILITY
Peak Reflow Temperature (C):	NOT SPECIFIED

Popular Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.

NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.