S402TSRP by Littelfuse | Triggering Devices

Image shown is a representation only.

Manufacturer	Littelfuse
Manufacturer's Part Number	S402TSRP
Description	SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum On-state Current: .95 A;
Datasheet	S402TSRP Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Trigger Device Type:	SCR
Maximum Time At Peak Reflow Temperature (s):	40
Configuration:	SINGLE
Sub-Category:	Silicon Controlled Rectifiers
Surface Mount:	YES
Maximum Leakage Current:	.5 mA
Terminal Finish:	MATTE TIN
Minimum Critical Rate of Rise of Off-state Voltage:	25 V/us
Maximum Holding Current:	5 mA
No. of Terminals:	4
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G4
No. of Elements:	1
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	125 Cel
Repetitive Peak Off-state Voltage:	400 V
Maximum RMS On-state Current:	1.5 A
Repetitive Peak Reverse Voltage:	400 V
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Non Repetitive Peak On-state Current:	15 A
Maximum DC Gate Trigger Voltage:	.8 V
Maximum DC Gate Trigger Current:	.2 mA
Qualification:	Not Qualified
Maximum On-state Current:	.95 A
Peak Reflow Temperature (C):	260

Popular Products

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.