SP3222-02ETG by Littelfuse | Diodes

Image shown is a representation only.

Manufacturer	Littelfuse
Manufacturer's Part Number	SP3222-02ETG
Description	TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: BOTTOM; Terminal Form: NO LEAD; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Datasheet	SP3222-02ETG Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Config:	COMMON ANODE, 2 ELEMENTS
Diode Type:	TRANS VOLTAGE SUPPRESSOR DIODE
Surface Mount:	YES
Maximum Reverse Current:	.1 uA
No. of Terminals:	3
Terminal Position:	BOTTOM
Package Style (Meter):	CHIP CARRIER
Maximum Non Repetitive Peak Reverse Power Dissipation:	30 W
Technology:	AVALANCHE
JESD-30 Code:	R-PBCC-N3
Minimum Breakdown Voltage:	6.1 V
No. of Elements:	2
Package Shape:	RECTANGULAR
Terminal Form:	NO LEAD
Polarity:	UNIDIRECTIONAL
Maximum Operating Temperature:	125 Cel
Case Connection:	ANODE
Moisture Sensitivity Level (MSL):	1
Maximum Breakdown Voltage:	9 V
Reverse Test Voltage:	3.3 V
Maximum Repetitive Peak Reverse Voltage:	3.3 V
Maximum Clamping Voltage:	10 V
Minimum Operating Temperature:	-40 Cel
Diode Element Material:	SILICON
Nominal Breakdown Voltage:	8 V
Additional Features:	LOW CAPACITANCE
Reference Standard:	AEC-Q101; IEC-61000-4-2, 4-4, 4-5

Popular Products

KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.

AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;