Image shown is a representation only.
| Manufacturer | Lorlin Electronics |
|---|---|
| Manufacturer's Part Number | CK1060 |
| Description | ROTARY SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DP6T; Type (Actuator): SPINDLE; Center Contact Plating: SILVER; Terminal Length: .161 inch; |
| Datasheet | CK1060 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | 1 A |
| No. of Positions: | 6 |
| Center Contact Plating: | SILVER |
| Center Contact Material: | BRASS |
| Type (Bushing): | M10X0.75 |
| Length (Bushing): | .315 inch |
| Type (Actuator): | SPINDLE |
| Maximum AC Contact Voltage: | 24 V |
| Switch Action: | LATCHED |
| Terminal Material: | BRASS |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Contact Resistance: | 20 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | 1 A |
| End Contact Material: | BRASS |
| No. of Switch Sections: | 1 |
| Maximum DC Contact Voltage: | 24 V |
| DC Maximum Rating R Load (Contact): | 1A@24VDC |
| PCB Hole Count: | 14 |
| Switch Type: | ROTARY SWITCH |
| AC Maximum Rating R Load (Contact): | 1A@24VAC |
| Indexing Angle: | 30 deg |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Switch Function: | DP6T |
| Contact Timing: | MAKE-BEFORE-BREAK |
| Terminal Length: | .161 inch |
| Length (Actuator): | 1.654 inch |
| End Contact Plating: | SILVER |
| Body Height: | 14.1 mm |
| Body Length/Diameter: | 26.2 mm |
