MAX368CPN+ by Maxim Integrated | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	Maxim Integrated
Manufacturer's Part Number	MAX368CPN+
Description	SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Datasheet	MAX368CPN+ Datasheet
In Stock	2,397

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	30
Width (mm):	7.62 mm
Maximum Seated Height:	4.572 mm
Maximum Switch-on Time:	1000 ns
Maximum Supply Current (Isup):	2 mA
Sub-Category:	Multiplexer or Switches
Surface Mount:	NO
Terminal Finish:	MATTE TIN
No. of Terminals:	18
Maximum On-state Resistance (Ron):	1800 ohm
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	CMOS
JESD-30 Code:	R-PDIP-T18
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	70 Cel
No. of Channels:	8
Package Code:	DIP
Switching (V):	BREAK-BEFORE-MAKE
Nominal Supply Voltage (Vsup):	15 V
Moisture Sensitivity Level (MSL):	1
Nominal Off-state Isolation:	68 dB
Maximum Switch-off Time:	1000 ns
Nominal Negative Supply Voltage (Vsup):	-15 V
JESD-609 Code:	e3
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	DIP18,.3
Other IC type:	SINGLE-ENDED MULTIPLEXER
Length:	22.86 mm
Maximum Signal Current:	.02 A
Peak Reflow Temperature (C):	260
Terminal Pitch:	2.54 mm
Temperature Grade:	COMMERCIAL
Power Supplies (V):	+-15

Pricing (USD)

Qty.	Unit Price	Ext. Price
2,397	-	-

Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;