MAX4367EBL+T by Maxim Integrated | General Purpose ICs

Image shown is a representation only.

Manufacturer	Maxim Integrated
Manufacturer's Part Number	MAX4367EBL+T
Description	AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 8; Package Code: VFBGA; Package Shape: SQUARE;
Datasheet	MAX4367EBL+T Datasheet
In Stock	2,091

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Seated Height:	.67 mm
Minimum Supply Voltage (Vsup):	2.3 V
Surface Mount:	YES
Maximum Supply Current:	4 mA
Terminal Finish:	TIN SILVER COPPER
No. of Terminals:	8
Terminal Position:	BOTTOM
Package Style (Meter):	GRID ARRAY, VERY THIN PROFILE, FINE PITCH
Technology:	BIPOLAR
JESD-30 Code:	S-PBGA-B8
Package Shape:	SQUARE
Terminal Form:	BALL
Maximum Operating Temperature:	85 Cel
No. of Channels:	1
Package Code:	VFBGA
General IC Type:	AUDIO AMPLIFIER
Nominal Bandwidth:	.02 kHz
Width:	1.52 mm
Moisture Sensitivity Level (MSL):	1
JESD-609 Code:	e1
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Nominal Output Power:	.33 W
Length:	1.52 mm
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL
Maximum Supply Voltage (Vsup):	5.5 V

Pricing (USD)

Qty.	Unit Price	Ext. Price
2,091	-	-

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;