MX7507KN by Maxim Integrated | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	Maxim Integrated
Manufacturer's Part Number	MX7507KN
Description	DIFFERENTIAL MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Datasheet	MX7507KN Datasheet
In Stock	801

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Minimum Negative Supply Voltage (Vsup):	-4.5 V
Width (mm):	7.62 mm
Maximum Seated Height:	4.572 mm
Minimum Supply Voltage (Vsup):	4.5 V
Maximum Switch-on Time:	1000 ns
Sub-Category:	Multiplexer or Switches
Nominal On-state Resistance Match:	18 ohm
Surface Mount:	NO
Terminal Finish:	TIN LEAD
No. of Terminals:	28
Maximum On-state Resistance (Ron):	450 ohm
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	CMOS
JESD-30 Code:	R-PDIP-T28
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	70 Cel
No. of Channels:	8
Package Code:	DIP
Switching (V):	BREAK-BEFORE-MAKE
Nominal Supply Voltage (Vsup):	15 V
Moisture Sensitivity Level (MSL):	1
Nominal Off-state Isolation:	70 dB
Maximum Switch-off Time:	1000 ns
Nominal Negative Supply Voltage (Vsup):	-15 V
JESD-609 Code:	e0
Minimum Operating Temperature:	0 Cel
Maximum Negative Supply Voltage (Vsup):	-18 V
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	DIP28,.6
Other IC type:	DIFFERENTIAL MULTIPLEXER
Length:	34.795 mm
Peak Reflow Temperature (C):	245
Terminal Pitch:	2.54 mm
Temperature Grade:	COMMERCIAL
Maximum Supply Voltage (Vsup):	18 V
Power Supplies (V):	+-15

Pricing (USD)

Qty.	Unit Price	Ext. Price
801	-	-

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;

ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.