Image shown is a representation only.
| Manufacturer | Microchip Technology |
|---|---|
| Manufacturer's Part Number | AT24CM01-XHD-T |
| Description | EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Programming Voltage (V): 5; |
| Datasheet | AT24CM01-XHD-T Datasheet |
| In Stock | 5,617 |
| NAME | DESCRIPTION |
|---|---|
| Package Body Material: | PLASTIC/EPOXY |
| Maximum Time At Peak Reflow Temperature (s): | 40 |
| Programming Voltage (V): | 5 |
| Minimum Supply Voltage (Vsup): | 2.5 V |
| Sub-Category: | EEPROMs |
| Surface Mount: | YES |
| Technology: | CMOS |
| Package Shape: | RECTANGULAR |
| Terminal Form: | GULL WING |
| Operating Mode: | SYNCHRONOUS |
| Package Code: | TSSOP |
| Moisture Sensitivity Level (MSL): | 1 |
| No. of Ports: | 1 |
| Memory Width: | 8 |
| Qualification: | Not Qualified |
| Package Equivalence Code: | TSSOP8,.25 |
| Additional Features: | 1.7V TO 5.5V @ 0.4MHz |
| Minimum Data Retention Time: | 40 |
| Peak Reflow Temperature (C): | 260 |
| Terminal Pitch: | .65 mm |
| Maximum Standby Current: | .000001 Amp |
| Organization: | 128KX8 |
| Maximum Seated Height: | 1.2 mm |
| Maximum Supply Current: | 3 mA |
| Terminal Finish: | NICKEL PALLADIUM GOLD |
| Maximum Write Cycle Time (tWC): | 5 ms |
| No. of Terminals: | 8 |
| I2C Control Byte: | 1010DDDR |
| Maximum Clock Frequency (fCLK): | 1 MHz |
| No. of Words: | 131072 words |
| Terminal Position: | DUAL |
| Package Style (Meter): | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Write Protection: | HARDWARE |
| JESD-30 Code: | R-PDSO-G8 |
| Maximum Operating Temperature: | 85 Cel |
| Endurance: | 1000000 Write/Erase Cycles |
| Width: | 3 mm |
| Serial Bus Type: | I2C |
| Memory Density: | 1048576 bit |
| Memory IC Type: | EEPROM |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -40 Cel |
| No. of Functions: | 1 |
| Length: | 4.4 mm |
| No. of Words Code: | 128K |
| Nominal Supply Voltage / Vsup (V): | 5 |
| Parallel or Serial: | SERIAL |
| Temperature Grade: | INDUSTRIAL |
| Maximum Supply Voltage (Vsup): | 5.5 V |
| Power Supplies (V): | 2.7/5 |
