Image shown is a representation only.
| Manufacturer | Microchip Technology |
|---|---|
| Manufacturer's Part Number | ENC28J60-I/SP |
| Description | SERIAL IO/COMMUNICATION CONTROLLER, LAN; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; |
| Datasheet | ENC28J60-I/SP Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Minimum Supply Voltage: | 3.1 V |
| Package Body Material: | PLASTIC/EPOXY |
| Nominal Supply Voltage: | 3.3 V |
| Maximum Seated Height: | 4.572 mm |
| Sub-Category: | Serial IO/Communication Controllers |
| Surface Mount: | NO |
| Maximum Supply Current: | 180 mA |
| Terminal Finish: | MATTE TIN |
| On Chip Data RAM Width: | 8 |
| No. of Terminals: | 28 |
| No. of Serial I/Os: | 1 |
| Terminal Position: | DUAL |
| Package Style (Meter): | IN-LINE |
| Address Bus Width: | 0 |
| Screening Level: | TS 16949 |
| Maximum Data Transfer Rate: | 1.25 MBps |
| Technology: | CMOS |
| RAM Words: | 8192 |
| JESD-30 Code: | R-PDIP-T28 |
| Maximum Clock Frequency: | 25 MHz |
| Package Shape: | RECTANGULAR |
| Terminal Form: | THROUGH-HOLE |
| Maximum Operating Temperature: | 85 Cel |
| Package Code: | DIP |
| Width: | 15.24 mm |
| Peripheral IC Type: | SERIAL IO/COMMUNICATION CONTROLLER, LAN |
| Maximum Supply Voltage: | 3.6 V |
| Low Power Mode: | YES |
| Boundary Scan: | NO |
| External Data Bus Width: | 0 |
| Communication Protocol: | SYNC; BIT ;BYTE |
| JESD-609 Code: | e3 |
| Minimum Operating Temperature: | -40 Cel |
| Qualification: | Not Qualified |
| Package Equivalence Code: | DIP28,.6 |
| Length: | 34.671 mm |
| Bus Compatibility: | SPI |
| Terminal Pitch: | 2.54 mm |
| Temperature Grade: | INDUSTRIAL |
| Power Supplies (V): | 3.3 |
