MCP1603T-180I/OS by Microchip Technology | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	Microchip Technology
Manufacturer's Part Number	MCP1603T-180I/OS
Description	SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Datasheet	MCP1603T-180I/OS Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Nominal Output Voltage:	1.8 V
Control Mode:	CURRENT-MODE
Maximum Time At Peak Reflow Temperature (s):	40
Width (mm):	1.6 mm
Maximum Seated Height:	1.1 mm
Maximum Output Current:	.5 A
Sub-Category:	Switching Regulator or Controllers
Surface Mount:	YES
Terminal Finish:	Matte Tin (Sn) - annealed
Switcher Config:	BUCK
No. of Terminals:	5
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE
Screening Level:	TS 16949
JESD-30 Code:	R-PDSO-G5
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	TSOP
Minimum Output Voltage:	1.746 V
Control Technique:	PULSE WIDTH MODULATION
Moisture Sensitivity Level (MSL):	1
Maximum Switching Frequency:	2800 kHz
Minimum Input Voltage:	2.7 V
Maximum Input Voltage:	5.5 V
Maximum Output Voltage:	1.854 V
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	TSOP5/6,.11,37
Nominal Input Voltage:	3.6 V
Other IC type:	SWITCHING REGULATOR
Length:	2.9 mm
Additional Features:	IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION
Peak Reflow Temperature (C):	260
Terminal Pitch:	.95 mm
Temperature Grade:	INDUSTRIAL

Popular Products

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;

The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;