SST25VF080B-50-4C-PAE by Microchip Technology | Memory ICs

Image shown is a representation only.

Manufacturer	Microchip Technology
Manufacturer's Part Number	SST25VF080B-50-4C-PAE
Description	FLASH; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDIP-T8;
Datasheet	SST25VF080B-50-4C-PAE Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Standby Current:	.00003 Amp
Organization:	8MX1
Output Characteristics:	3-STATE
Maximum Seated Height:	5.334 mm
Minimum Supply Voltage (Vsup):	2.7 V
Sub-Category:	Flash Memories
Surface Mount:	NO
Maximum Supply Current:	30 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	8
Maximum Clock Frequency (fCLK):	50 MHz
No. of Words:	8388608 words
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Write Protection:	HARDWARE/SOFTWARE
Technology:	CMOS
JESD-30 Code:	R-PDIP-T8
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Operating Mode:	SYNCHRONOUS
Maximum Operating Temperature:	70 Cel
Endurance:	100000 Write/Erase Cycles
Package Code:	DIP
Width:	7.62 mm
Serial Bus Type:	SPI
No. of Ports:	1
Memory Density:	8388608 bit
Memory IC Type:	FLASH
JESD-609 Code:	e3
Minimum Operating Temperature:	0 Cel
Memory Width:	1
No. of Functions:	1
Type:	NOR TYPE
Qualification:	Not Qualified
Package Equivalence Code:	DIP8,.3
Length:	9.271 mm
No. of Words Code:	8M
Minimum Data Retention Time:	100
Parallel or Serial:	SERIAL
Terminal Pitch:	2.54 mm
Temperature Grade:	COMMERCIAL
Maximum Supply Voltage (Vsup):	3.6 V
Power Supplies (V):	3/3.3

Popular Products

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).

Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;

ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;