Image shown is a representation only.
| Manufacturer | Microchip Technology |
|---|---|
| Manufacturer's Part Number | SST25WF080-75-4I-SAF |
| Description | FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; |
| Datasheet | SST25WF080-75-4I-SAF Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Package Body Material: | PLASTIC/EPOXY |
| Maximum Standby Current: | .00002 Amp |
| Organization: | 1MX8 |
| Maximum Seated Height: | 1.75 mm |
| Programming Voltage (V): | 1.8 |
| Minimum Supply Voltage (Vsup): | 1.65 V |
| Sub-Category: | Flash Memories |
| Surface Mount: | YES |
| Maximum Supply Current: | 10 mA |
| Terminal Finish: | NICKEL PALLADIUM GOLD |
| No. of Terminals: | 8 |
| Maximum Clock Frequency (fCLK): | 75 MHz |
| No. of Words: | 1048576 words |
| Terminal Position: | DUAL |
| Package Style (Meter): | SMALL OUTLINE |
| Write Protection: | HARDWARE/SOFTWARE |
| Technology: | CMOS |
| JESD-30 Code: | R-PDSO-G8 |
| Package Shape: | RECTANGULAR |
| Terminal Form: | GULL WING |
| Operating Mode: | SYNCHRONOUS |
| Maximum Operating Temperature: | 85 Cel |
| Endurance: | 100000 Write/Erase Cycles |
| Package Code: | SOP |
| Width: | 3.9 mm |
| Moisture Sensitivity Level (MSL): | 3 |
| Serial Bus Type: | SPI |
| Memory Density: | 8388608 bit |
| Memory IC Type: | FLASH |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -40 Cel |
| Memory Width: | 8 |
| No. of Functions: | 1 |
| Type: | NOR TYPE |
| Qualification: | Not Qualified |
| Package Equivalence Code: | SOP8,.25 |
| Length: | 4.9 mm |
| No. of Words Code: | 1M |
| Nominal Supply Voltage / Vsup (V): | 1.8 |
| Minimum Data Retention Time: | 100 |
| Parallel or Serial: | SERIAL |
| Terminal Pitch: | 1.27 mm |
| Temperature Grade: | INDUSTRIAL |
| Maximum Supply Voltage (Vsup): | 1.95 V |
| Power Supplies (V): | 3/3.3 |
