MT45W4MW16BFB-858WT by Micron Technology | Memory ICs

Image shown is a representation only.

Manufacturer	Micron Technology
Manufacturer's Part Number	MT45W4MW16BFB-858WT
Description	PSEUDO STATIC RAM; Temperature Grade: OTHER; No. of Terminals: 54; Package Code: VFBGA; Package Shape: RECTANGULAR; Maximum Supply Current: 35 mA;
Datasheet	MT45W4MW16BFB-858WT Datasheet
In Stock	1,635

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Standby Current:	.00012 Amp
Organization:	4MX16
Output Characteristics:	3-STATE
Maximum Seated Height:	1 mm
Minimum Supply Voltage (Vsup):	1.7 V
Sub-Category:	Other Memory ICs
Surface Mount:	YES
Maximum Supply Current:	35 mA
Terminal Finish:	TIN LEAD
No. of Terminals:	54
No. of Words:	4194304 words
Terminal Position:	BOTTOM
Package Style (Meter):	GRID ARRAY, VERY THIN PROFILE, FINE PITCH
Technology:	CMOS
JESD-30 Code:	R-PBGA-B54
Package Shape:	RECTANGULAR
Terminal Form:	BALL
Operating Mode:	ASYNCHRONOUS
Maximum Operating Temperature:	85 Cel
Package Code:	VFBGA
Width:	6 mm
Input/Output Type:	COMMON
Memory Density:	67108864 bit
Memory IC Type:	PSEUDO STATIC RAM
JESD-609 Code:	e0
Minimum Operating Temperature:	-30 Cel
Memory Width:	16
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	BGA54,6X9,30
Length:	8 mm
Maximum Access Time:	85 ns
No. of Words Code:	4M
Nominal Supply Voltage / Vsup (V):	1.8
Additional Features:	SYNCHRONOUS BURST MODE POSSIBLE
Parallel or Serial:	PARALLEL
Terminal Pitch:	.75 mm
Temperature Grade:	OTHER
Maximum Supply Voltage (Vsup):	1.95 V
Power Supplies (V):	1.8,1.8/3

Pricing (USD)

Qty.	Unit Price	Ext. Price
1,635	-	-

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;