DTSM-32S-B by Multicomp Pro | Switches

Image shown is a representation only.

Manufacturer	Multicomp Pro
Manufacturer's Part Number	DTSM-32S-B
Description	Special Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; End Contact Plating: SILVER; Body Length/Diameter: 5.9944 mm;
Datasheet	DTSM-32S-B Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.05 A
Center Contact Plating:	SILVER
Center Contact Material:	STAINLESS STEEL
Housing Material:	STAINLESS STEEL
Body Color:	BLACK
Type (Actuator):	PUSHBUTTON
Actuator Travel (mm):	.254
Terminal Material:	BRASS
Termination Type:	SOLDER
Electrical Life:	50000 Cycle(s)
Maximum Operating Temperature:	70 Cel
Manufacturer Series:	DTS
Material (Actuator):	NYLON
Contact Resistance:	100 mohm
Insulation Resistance:	100000000 ohm
Color (Actuator):	SALMON
End Contact Material:	STAINLESS STEEL
Maximum DC Contact Voltage:	12 V
DC Maximum Rating R Load (Contact):	0.05A@12VDC
Dielectric Withstand Volts (V):	250VAC
Minimum Operating Temperature:	-25 Cel
Mounting Feature:	SURFACE MOUNT-STRAIGHT
Body Width:	3.5052 inch
Switch Function:	SPST
Length (Actuator):	.059 inch
End Contact Plating:	SILVER
Body Height:	3.5052 mm
Body Length/Diameter:	5.9944 mm

Popular Products

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;

DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;