SSM-003 by Multicomp Pro | Switches

Image shown is a representation only.

Manufacturer	Multicomp Pro
Manufacturer's Part Number	SSM-003
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): PLUNGER; Contact Resistance: 100 mohm; Material (Actuator): POLYOXYMETHYLENE;
Datasheet	SSM-003 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.5 A
Center Contact Material:	SILVER ALLOY
Housing Material:	POLYBUTYLENE TEREPHTHALATE
Type (Actuator):	PLUNGER
Switch Action:	VERTICAL
Terminal Material:	BRASS
Termination Type:	SOLDER
Electrical Life:	100000 Cycle(s)
Maximum Operating Temperature:	70 Cel
Manufacturer Series:	SSM
Material (Actuator):	POLYOXYMETHYLENE
Contact Resistance:	100 mohm
Insulation Resistance:	100000000 ohm
End Contact Material:	SILVER ALLOY
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	0.5A@30VDC
Dielectric Withstand Volts (V):	500VAC
Switch Type:	SNAP ACTING/LIMIT SWITCH
Minimum Operating Temperature:	-15 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	2.6924 inch
Switch Function:	SPDT
Terminal Length:	.122 inch
Length (Actuator):	.255 inch
Insulator Material:	POLYBUTYLENE TEREPHTHALATE
Body Length/Diameter:	8.2042 mm

Popular Products

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.

LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;