Murata Manufacturing - DLP11TB800UL2L

Wurth Elektronik's 74279228260 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C, DC resistance of 0.008 ohm, and output impedance of 26Ω. Ideal for applications requiring surface mount filters with a rated current of 6.5A.

Wuerth Elektronik & Kg 742792656 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and an output impedance of 750 OHM. Ideal for surface mount applications in electronics requiring filtering at frequencies ranging from 100 MHz to 150 MHz.

Murata Manufacturing's NFM21PC475B1A3D is a data line filter with 100 Mohm insulation resistance, 10V rated voltage, and 4700000 uF capacitance. It is ideal for applications requiring noise suppression in electronic circuits.

Murata Manufacturing's VFS6VD81E221T51B is a 25V data line filter with 0.5 Mohm insulation resistance. It operates b/w -40 to 105 °C and has a capacitance of 220 uF. Ideal for applications requiring through hole mounting, rated current of 6A, and compact dimensions of L8.0xB2.54xH10.5 mm.

Laird Technologies' HZ0805E601R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 600 OHM. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 0.3 ohm and can handle up to 0.5 A rated current.

FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2.5 A; Approvals (V): IEC; Width (mm): 1.6; Output Impedance (ohm): 600 OHM;

Wurth Elektronik 744272251 is a UL-approved data line filter with 2 functions, rated at 80V and 2A. With inductance of 250uH, it operates b/w -40°C to 125°C. Ideal for applications requiring surface mount filters with dimensions of L10.0xB8.7xH6.5mm.

The TDK ACT45B-220-2P-TL003 is a FERRITE CHIP filter with 22uH inductance, 10 Mohm insulation resistance, and 0.25A rated current. Ideal for data line filtering applications due to its compact dimensions of L4.5XB3.2XH2.8 (mm) and surface mounting type.

Murata Manufacturing's NFM18CC221R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 220uF capacitance. It is a feed through capacitor suitable for applications requiring filtering of data lines in electronic circuits.

TDK's MMZ1608B102CTD25 is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is commonly used in automotive applications due to its AEC-Q200 screening level.

Murata Manufacturing's BLM21SP601SH1D is a FERRITE CHIP filter with 2 terminals, AEC-Q200 compliant. With max temp of 125°C and min of -55°C, it has DC resistance of 0.06 ohm. Ideal for data line filtering applications due to its 600 OHM output impedance and rated current of 1.5A.

Murata Manufacturing's BLM15AX121SN1D is a chip bead data line filter with 2 terminals, rated for 0.7A current and 120 ohm output impedance. It operates b/w -55 to 125 °C, with dimensions of L1.0xB0.5xH0.5 mm and is used in surface mount applications for filtering frequencies up to 100 MHz.

The Bourns 7116 is a data line filter with two functions. It has a maximum operating temperature of 105°C and a minimum operating temperature of -55°C. The inductance is 8000 uH and the maximum DC resistance is 0.2 ohm. It is a through-hole mount and rated for a current of 2 A.

Bourns SRF0905-250Y is a 2-function data line filter with inductance of 25uH and rated current of 1A. It operates b/w -40°C to 105°C, has a max DC resistance of 0.16 ohm, and output impedance of 600 ohm. Ideal for surface mount applications in electronics requiring noise filtering on data lines.

FEED THROUGH CAPACITOR; Rated Current: 5 A; Height: 2.79 mm; Mounting Type: PANEL MOUNT; JESD-609 Code: e4; Maximum Insertion Loss: 25 dB;

Murata Manufacturing's BLM18KG601SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.15 ohm and output impedance of 600 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 1.3A and is commonly used in electronic devices requiring noise suppression on data lines.

MI0805J102R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it has a max frequency of 1000 MHz and DC resistance of 0.15 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression up to 25 MHz.

Murata Manufacturing's BNX022-01B is a 50V data line filter with 35dB attenuation at 1000MHz. With dimensions of L12.1xB9.1xH3.1mm, it operates b/w -40 to 125°C and has an output impedance of 50Ω. Ideal for applications requiring high insulation resistance and rated current up to 10A in surface mount configurations.

FEED THROUGH CAPACITOR; Mounting Type: PCB MOUNT; Capacitance: 1000 uF; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel; Minimum Insulation Resistance: 10000 Mohm;

NXP Semiconductors' IP4256CZ5-W,115 is a 5-terminal data line filter with max operating temp of 85°C and min of -40°C. It features surface mounting type, tin terminal finish, and plastic package material. Ideal for applications requiring noise suppression in data lines.