Murata Manufacturing - DSN9NC51H223Q55B

The TDK MPZ1608S181ATAH0 is a 5V FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it is ideal for surface mount applications in electronics requiring an output impedance of 180 ohms at a rated current of 2A.

Bourns MH2029-221Y is a chip bead data line filter with 2 terminals, rated for 2A current. Featuring ferrite construction, it offers 220 ohm output impedance and operates b/w -55°C to 125°C. Ideal for applications requiring noise suppression in data lines up to 100MHz frequency.

DLW21HN121SQ2L by Murata is a Data Line Filter with 2 functions and rated voltage of 50V. It has a max operating temperature of 85°C and min insulation resistance of 10 Mohm. This filter is suitable for applications requiring noise suppression in data lines.

Wurth Elektronik 744272251 is a UL-approved data line filter with 2 functions, rated at 80V and 2A. With inductance of 250uH, it operates b/w -40°C to 125°C. Ideal for applications requiring surface mount filters with dimensions of L10.0xB8.7xH6.5mm.

BLM18PG471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.

Murata's BLM21BD601SN1D is an 0805 chip bead filter with 2 terminals, ideal for data line filtering. With a max operating temp of 125°C and min of -55°C, it offers low DC resistance of 0.35 ohm at 100 MHz frequency. This ferrite chip has dimensions L2.0xB1.25xH0.85 mm and rated current of 0.2 A, suitable for surface mount applications in various electronic devices.

Murata Manufacturing's BLM21PG600SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications, this surface mount component has a rated current of 3A and uses ferrite material for effective noise suppression.

Murata's BLM18AG221SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 220 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of 1.6x0.8x0.8mm.

4400-099LF by Cts is a Data Line Filter with 20000 Mohm Min Insulation Resistance, 50 V Rated Voltage, and FEED THROUGH CAPACITOR filter type. It operates b/w -55 to 125 °C, has a Max Insertion Loss of 70 dB, and a Capacitance of 50000 uF. Ideal for panel mounting applications requiring up to 10 A rated current.

Murata Manufacturing's BLM18AG121SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -55°C to 125°C, has a DC resistance of 0.18 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.

PA4339.501NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 4uH and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with a max current rating of 5A.

Wurth Elektronik 744235801 is a Data Line Filter with 2 functions, AEC-Q200 screening. Rated for 60V, it has an inductance of 1.3uH and max DC resistance of 0.12 ohm. Ideal for applications requiring surface mount filters with dimensions D4.53.2XH2.8mm and rated current of 1A.

Murata's BLM15AG221SN1D is a 0402 chip bead filter with 220 ohm output impedance, 0.29 ohm DC resistance, and 0.45 A rated current. It operates b/w -55 to 125 °C and is ideal for data line filtering applications due to its ferrite construction and surface mounting type.

HI1812V101R-10 by Laird Technologies is a chip bead data line filter with 2 terminals. It operates b/w -40 to 125 °C and has a DC resistance of 0.007 ohm. With dimensions of L4.5XB3.2XH1.4 (mm), it's ideal for applications requiring filtering in the frequency range of 25-1000 MHz at an output impedance of 125 OHM.

TDK's ACM12V-701-2PL-TL00 data line filter has 2 functions, rated at 80V and 8A. With a wide temperature range (-40 to 125°C), it is ideal for automotive applications requiring high insulation resistance (10 Mohm) and low DC resistance (0.006 ohm).

Vishay Intertechnology's ILHB0805ER251V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.04 ohm, and output impedance of 250 OHM. Ideal for surface mount applications in filtering frequencies up to 100 MHz.

FBMJ3216HS800-TV by Taiyo Yuden is a ferrite chip data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -40°C. This surface mount filter has dimensions of L3.2XB1.6XH1.1 (mm) and is suitable for applications requiring an output impedance of 80 ohms and a rated current of 4A.

TDK MMZ1608R601ATD25 is a chip bead data line filter with 2 terminals. It offers a max DC resistance of 0.4 ohm and an output impedance of 600 ohm. AEC-Q200 screening makes it suitable for automotive applications, ensuring reliable performance in extreme temperatures from -55°C to 125°C.

Murata's NFM41CC222R2A3L is a data line filter with 100V rated voltage, 2200uF capacitance, and -55 to 125°C operating temperature range. It features FEED THROUGH CAPACITOR type and is ideal for applications requiring high insulation resistance and surface mounting type.

HI0805R800R-10 by Laird Technologies is a chip bead data line filter with 80 OHM output impedance. It operates b/w -40 to 125 °C, suitable for frequencies ranging from 25 MHz to 1000 MHz. With dimensions of L2.0XB1.25XH0.9 (mm), it is ideal for surface mount applications in various electronic devices.