LM1965N by National Semiconductor | General Purpose ICs

Image shown is a representation only.

Manufacturer	National Semiconductor
Manufacturer's Part Number	LM1965N
Description	AUDIO SINGLE CHIP RECEIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet	LM1965N Datasheet
In Stock	439

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Seated Height:	5.08 mm
Minimum Supply Voltage (Vsup):	7.3 V
Surface Mount:	NO
Maximum Supply Current:	45 mA
Terminal Finish:	TIN LEAD
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	BIPOLAR
JESD-30 Code:	R-PDIP-T20
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	85 Cel
Package Code:	DIP
General IC Type:	AUDIO SINGLE CHIP RECEIVER
Width:	7.62 mm
Harmonic Distortion:	.15 %
JESD-609 Code:	e0
Minimum Operating Temperature:	-20 Cel
No. of Functions:	1
Qualification:	Not Qualified
Length:	26.075 mm
Demodulation Type:	FM
Nominal Signal to Noise Ratio (FM):	84 dB
Nominal Output Voltage (FM):	320 mV
Terminal Pitch:	2.54 mm
Temperature Grade:	OTHER
Maximum Supply Voltage (Vsup):	16 V

Pricing (USD)

Qty.	Unit Price	Ext. Price
439	-	-

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;